Post New Message      Search Current Messages      Set Preferences      Top 10      View User Profiles      Create Profile       Messageboard FAQs      SPAM PATROL

Looking for Something?

Welcome!
Messages Posted Within the Last 10 Year(s)		(Compressed Listing)

• Looking for something is back! -- Ellis Walentine -- Tuesday, 5 July 2005, at 11:30 a.m.
  3 messages -- Newest posted Tuesday, 5 July 2005, at 12:08 p.m.
• Looking for a Delta 22-560 or TP400LS -- Denis Chénard, Orléans, Ont. -- Tuesday, 5 July 2005, at 3:45 p.m.
  1 message
• millers falls parts -- David Poppel -- Tuesday, 5 July 2005, at 9:29 p.m.
  4 messages -- Newest posted Wednesday, 29 November 2006, at 2:06 p.m.
• Wanted: 1 3/4" Stanley 750 chisel -- Ralph Lipeles -- Wednesday, 6 July 2005, at 9:27 a.m.
  1 message
• Looking for a used Wood Master planer/molder -- Dennis Smith -- Wednesday, 6 July 2005, at 12:11 p.m.
  2 messages -- Newest posted Wednesday, 6 July 2005, at 5:18 p.m.
• picnic table -- L B Heath -- Wednesday, 6 July 2005, at 7:28 p.m.
  2 messages -- Newest posted Sunday, 10 July 2005, at 1:39 a.m.
• plans for corner cabinets -- dave.mary -- Thursday, 7 July 2005, at 10:35 a.m.
  2 messages -- Newest posted Friday, 8 July 2005, at 8:34 a.m.
• Powermatic Model 90 tailstock -- Alan W -- Saturday, 9 July 2005, at 12:03 a.m.
  1 message
• Drill Press -- GarryVA -- Saturday, 9 July 2005, at 11:19 a.m.
  2 messages -- Newest posted Saturday, 9 July 2005, at 2:53 p.m.
• Badger Post Project Plans -- David -- Saturday, 9 July 2005, at 3:39 p.m.
  1 message
• sliding extension table for powermatic 66 -- Opa Ooyen -- Saturday, 9 July 2005, at 10:54 p.m.
  3 messages -- Newest posted Thursday, 21 July 2005, at 1:19 p.m.
• Birdseye Maple in Wisconsin/Michigan -- Brook -- Monday, 11 July 2005, at 11:30 a.m.
  3 messages -- Newest posted Wednesday, 3 August 2005, at 11:37 a.m.
• Unusual/Rare Woods Wanted -- Mike Oles -- Monday, 11 July 2005, at 2:25 p.m.
  3 messages -- Newest posted Wednesday, 7 December 2005, at 6:16 p.m.
• Sideplate for Miller's Falls version of 140 Needed -- Scott Kindall -- Wednesday, 13 July 2005, at 12:57 a.m.
  2 messages -- Newest posted Wednesday, 13 July 2005, at 9:43 a.m.
• mortise chisel -- les winter -- Sunday, 17 July 2005, at 5:48 p.m.
  2 messages -- Newest posted Sunday, 13 January 2008, at 9:00 p.m.
• wood burner -- Jim D. -- Monday, 18 July 2005, at 10:20 a.m.
  1 message
• Inca tools, supplies -- Bob Baumann -- Thursday, 21 July 2005, at 9:03 a.m.
  2 messages -- Newest posted Friday, 29 July 2005, at 9:05 a.m.
• Lathe Parts Wanted -- Mike Oles -- Thursday, 21 July 2005, at 11:11 a.m.
  2 messages -- Newest posted Sunday, 31 July 2005, at 6:24 p.m.
• small engine tools -- Paul Waddle -- Monday, 25 July 2005, at 4:13 p.m.
  1 message
• Box Latch Hardware -- Tom MacGregor -- Tuesday, 26 July 2005, at 10:55 p.m.
  1 message
• WTB Quartersawn White Oak -- Douglas -- Wednesday, 27 July 2005, at 12:53 p.m.
  2 messages -- Newest posted Thursday, 28 July 2005, at 1:43 a.m.
• china cabinet help -- Jess in Mid Mo. -- Saturday, 30 July 2005, at 8:58 p.m.
  1 message
• looking for molding head that has one cutter -- Paul Waddle -- Sunday, 31 July 2005, at 12:05 a.m.
  5 messages -- Newest posted Friday, 5 August 2005, at 11:10 p.m.
• Train plans -- nomad1964 -- Sunday, 31 July 2005, at 8:28 p.m.
  1 message
• Dewalt 7730 manual -- Jack -- Wednesday, 3 August 2005, at 11:02 a.m.
  3 messages -- Newest posted Tuesday, 7 August 2007, at 7:58 a.m.
• Flag display case -- Roger J Behnke -- Thursday, 4 August 2005, at 8:37 p.m.
  6 messages -- Newest posted Tuesday, 9 August 2005, at 6:13 p.m.
• bench plans *PIC* -- Roger Mallory -- Monday, 8 August 2005, at 8:48 p.m.
  1 message
• Big Hinges -- tom norton -- Tuesday, 9 August 2005, at 7:33 a.m.
  2 messages -- Newest posted Friday, 19 August 2005, at 11:53 a.m.
• fluid lines for solvent based glue pot -- Michael V. -- Tuesday, 9 August 2005, at 7:38 p.m.
  2 messages -- Newest posted Thursday, 11 August 2005, at 9:41 a.m.
• tenon cutters -- Gordon Wood -- Thursday, 11 August 2005, at 11:05 a.m.
  2 messages -- Newest posted Friday, 12 August 2005, at 7:36 a.m.
• hi speed grinder belts -- Paul Waddle -- Friday, 12 August 2005, at 10:39 a.m.
  3 messages -- Newest posted Friday, 19 August 2005, at 10:08 a.m.
• Drawer slides-Cheap -- Rich in Oviedo -- Friday, 12 August 2005, at 6:59 p.m.
  6 messages -- Newest posted Monday, 15 August 2005, at 11:36 a.m.
• WHAT ARE GOOD RESOURCES FOR RUSTIC FURNITURE WOOD? -- Matthew Carnahan -- Saturday, 13 August 2005, at 2:58 p.m.
  3 messages -- Newest posted Wednesday, 21 December 2005, at 11:20 a.m.
• hold downs -- Hamish -- Sunday, 14 August 2005, at 6:19 p.m.
  1 message
• Western Wagon Plans *PIC* -- Kirk P. -- Sunday, 14 August 2005, at 9:20 p.m.
  2 messages -- Newest posted Friday, 18 November 2005, at 3:25 p.m.
• wide belt sander wanted -- Dennis -- Sunday, 14 August 2005, at 10:20 p.m.
  3 messages -- Newest posted Monday, 5 September 2005, at 4:42 p.m.
• BENCHTOP TOOLS -- Morris -- Tuesday, 16 August 2005, at 8:48 p.m.
  1 message
• American Woodworker #105 Jan '04 -- Brian Dz -- Thursday, 18 August 2005, at 6:16 p.m.
  1 message
• Plans for Picnic Table -- Garrick -- Friday, 19 August 2005, at 3:18 a.m.
  1 message
• Router Plane wanted -- Patrick Wheatley -- Friday, 19 August 2005, at 11:39 a.m.
  4 messages -- Newest posted Wednesday, 7 September 2005, at 1:27 p.m.
• wooden jig maker -- Eddie Sparks -- Saturday, 20 August 2005, at 7:19 p.m.
  1 message
• wood lathe 3 jaw chuck -- Paul Waddle -- Monday, 22 August 2005, at 12:19 a.m.
  1 message
• Tailstock for Vicmarc mini lathe -- Danny Wells -- Friday, 26 August 2005, at 8:35 p.m.
  1 message
• OT looking for a copy of Win98SE -- Dan Donaldson -- Friday, 26 August 2005, at 9:53 p.m.
  2 messages -- Newest posted Friday, 9 September 2005, at 9:47 p.m.
• small engine tolls -- Paul Waddle -- Sunday, 28 August 2005, at 11:56 a.m.
  3 messages -- Newest posted Sunday, 4 September 2005, at 3:01 p.m.
• Wanted - Cutters for Stanley 77 Dowel Machine -- Ralph Lipeles -- Thursday, 1 September 2005, at 8:23 a.m.
  1 message
• No 80 Stanley Scraper screws -- arw01 -- Sunday, 4 September 2005, at 3:00 p.m.
  6 messages -- Newest posted Sunday, 25 September 2005, at 11:13 p.m.
• old RBI 12 IN PLANER -- RICHARD Carroll -- Monday, 5 September 2005, at 7:45 p.m.
  1 message
• Crib mattress springs -- Greg in Muscatine IA -- Tuesday, 6 September 2005, at 11:52 a.m.
  3 messages -- Newest posted Thursday, 17 November 2005, at 2:05 p.m.
• Jet 1236 banjo guts -- Gary Evans Tallassee, TN -- Friday, 9 September 2005, at 9:46 p.m.
  1 message
• Adding an indexing/locking pin to a JET Mini Lathe -- Moshe Eshel -- Monday, 19 September 2005, at 5:58 a.m.
  3 messages -- Newest posted Monday, 19 September 2005, at 11:34 a.m.
• "top tool" brand table saw -- danny bui -- Monday, 19 September 2005, at 12:39 p.m.
  1 message
• Sander brushes -- Bob Martinson -- Tuesday, 20 September 2005, at 1:27 p.m.
  1 message
• Motor shop; hardware store? -- Bill Houghton, Sebastopol, CA -- Tuesday, 20 September 2005, at 11:11 p.m.
  2 messages -- Newest posted Wednesday, 21 September 2005, at 2:54 p.m.
• stanley No 80 blade retaing screw -- Arw01 -- Saturday, 24 September 2005, at 3:29 a.m.
  1 message
• woodlathe hd stock -- Paul Waddle -- Saturday, 24 September 2005, at 9:29 a.m.
  1 message
• Neet Steel Rod 1 1/2" by 8" long -- Ralph Lipeles -- Sunday, 25 September 2005, at 8:24 p.m.
  3 messages -- Newest posted Monday, 26 September 2005, at 8:21 a.m.
• Wanted, shed plans *LINK* -- Larry Fox -- Monday, 26 September 2005, at 9:11 a.m.
  2 messages -- Newest posted Saturday, 8 October 2005, at 12:45 a.m.
• Powermatic 66 fence -- Gary Latture -- Tuesday, 27 September 2005, at 11:19 a.m.
  1 message
• karate display -- roy -- Tuesday, 27 September 2005, at 8:32 p.m.
  1 message
• Free instructions custom rocking chair *LINK* -- Bill Kappel -- Tuesday, 27 September 2005, at 9:14 p.m.
  2 messages -- Newest posted Sunday, 20 November 2005, at 8:41 p.m.
• Stanley Spoke Shave #151 -- Charles Sharp -- Wednesday, 28 September 2005, at 10:17 a.m.
  2 messages -- Newest posted Thursday, 29 September 2005, at 11:04 a.m.
• Beaded chain -- Roger Hink -- Thursday, 29 September 2005, at 7:44 p.m.
  4 messages -- Newest posted Monday, 3 October 2005, at 7:28 p.m.
• jobsite stepstool -- woodhack -- Thursday, 29 September 2005, at 8:39 p.m.
  4 messages -- Newest posted Sunday, 9 October 2005, at 4:21 p.m.
• 3 phase bench grinder, 7" -- bill tindall -- Friday, 30 September 2005, at 1:25 p.m.
  1 message
• WTB McNaughton System -- CapeMayMike -- Saturday, 1 October 2005, at 9:01 p.m.
  1 message
• Looking for the righe CAD software -- Steve Heinze -- Sunday, 2 October 2005, at 4:46 p.m.
  1 message
• baby cradle -- rich connell -- Wednesday, 5 October 2005, at 12:14 a.m.
  7 messages -- Newest posted Thursday, 10 November 2005, at 7:16 p.m.
• Looking for a copy of "Veneering: A Foundation Co" -- Larry Fox -- Wednesday, 5 October 2005, at 3:19 p.m.
  2 messages -- Newest posted Wednesday, 5 October 2005, at 3:24 p.m.
• threading device -- Paul Waddle -- Thursday, 6 October 2005, at 1:46 p.m.
  1 message
• abrasive planer -- Paul Waddle -- Thursday, 6 October 2005, at 2:01 p.m.
  2 messages -- Newest posted Thursday, 20 October 2005, at 6:24 a.m.
• wood milling -- Karen -- Sunday, 9 October 2005, at 2:29 p.m.
  1 message
• Apprenticeship in Atlanta -- Kyle Swanson -- Tuesday, 11 October 2005, at 2:21 p.m.
  2 messages -- Newest posted Thursday, 27 October 2005, at 6:10 p.m.
• Pale moon ebony, B&W ebony -- TL -- Tuesday, 11 October 2005, at 6:01 p.m.
  1 message
• Milwaukee router -- Wayne -- Saturday, 15 October 2005, at 11:29 a.m.
  1 message
• Needed -- Arvin Brown -- Tuesday, 18 October 2005, at 10:30 p.m.
  2 messages -- Newest posted Wednesday, 19 October 2005, at 8:35 a.m.
• Eastern Hophornbeam -- William Duffield, on the Cohansey -- Tuesday, 18 October 2005, at 11:03 p.m.
  2 messages -- Newest posted Wednesday, 23 November 2005, at 10:14 a.m.
• WTB - Drillpress Mortise - Collar Only -- Gary Ratajczak -- Thursday, 20 October 2005, at 2:35 p.m.
  4 messages -- Newest posted Thursday, 10 November 2005, at 7:07 p.m.
• ISO baseball bat pattern -- Jesse -- Friday, 21 October 2005, at 6:21 p.m.
  1 message
• Rockwell Uniplane -- Bob C. Johnson -- Saturday, 22 October 2005, at 7:05 p.m.
  2 messages -- Newest posted Tuesday, 25 October 2005, at 9:44 p.m.
• Spinning wheels -- ThomD -- Sunday, 23 October 2005, at 12:06 a.m.
  3 messages -- Newest posted Sunday, 4 December 2005, at 10:21 p.m.
• Rack & Pinion for Drill Press -- John -- Monday, 24 October 2005, at 2:41 p.m.
  2 messages -- Newest posted Monday, 24 October 2005, at 10:07 p.m.
• Belt Guard for Powermatic 63 Table Saw -- Mark Kuzee -- Tuesday, 25 October 2005, at 10:07 a.m.
  1 message
• open sided sander -- Bob Kloes -- Friday, 28 October 2005, at 10:21 a.m.
  1 message
• Powerfeeder -- Marty -- Friday, 28 October 2005, at 2:16 p.m.
  1 message
• Jim Kingschott. -- Jerry Thompson -- Saturday, 29 October 2005, at 2:56 a.m.
  3 messages -- Newest posted Wednesday, 2 November 2005, at 4:46 p.m.
• Want Plans -- Ron -- Saturday, 29 October 2005, at 5:08 a.m.
  1 message
• draw leaf table -- pat skavdahl -- Monday, 31 October 2005, at 5:58 p.m.
  2 messages -- Newest posted Tuesday, 5 December 2006, at 1:00 p.m.
• POWERMATIC KNIFE GRINDER -- DAN SPANGLER -- Friday, 4 November 2005, at 1:01 a.m.
  3 messages -- Newest posted Monday, 14 November 2005, at 10:08 a.m.
• Delta/Rockwell Faceplates -- Greg in Muscatine IA -- Friday, 4 November 2005, at 9:30 a.m.
  1 message
• Need Tote screw for Stanley 4-1/2 -- Doug Littlejohn -- Friday, 4 November 2005, at 8:08 p.m.
  3 messages -- Newest posted Sunday, 6 November 2005, at 9:48 p.m.
• 2"x2"x4" or longer walnut scraps -- Carole in VA -- Friday, 4 November 2005, at 9:45 p.m.
  9 messages -- Newest posted Thursday, 10 November 2005, at 11:24 a.m.
• Lamps -- Larry Mason -- Saturday, 5 November 2005, at 12:33 p.m.
  2 messages -- Newest posted Sunday, 6 November 2005, at 9:42 p.m.
• Ben Franklin chair/ stepstool? -- Idahotim -- Saturday, 5 November 2005, at 10:23 p.m.
  1 message
• #2 lever cap -- Woodside -- Sunday, 6 November 2005, at 11:06 a.m.
  2 messages -- Newest posted Sunday, 6 November 2005, at 9:39 p.m.
• 3 phase converter -- Jess in Mid. Mo. -- Sunday, 6 November 2005, at 8:03 p.m.
  3 messages -- Newest posted Monday, 7 November 2005, at 12:02 p.m.
• Plans/drawings for a Dory Rowboat Coffee Table -- Sue Riggs -- Thursday, 10 November 2005, at 12:01 p.m.
  2 messages -- Newest posted Saturday, 12 November 2005, at 4:32 p.m.
• plans -- Jeff Hutcheson -- Friday, 11 November 2005, at 9:05 p.m.
  1 message
• steam bending wood -- R S Kiecker -- Sunday, 13 November 2005, at 11:06 a.m.
  5 messages -- Newest posted Friday, 7 April 2006, at 9:04 p.m.
• Wanted Motor Cover: PowerMatic 66 -- John -- Monday, 14 November 2005, at 3:59 p.m.
  2 messages -- Newest posted Tuesday, 15 November 2005, at 10:39 a.m.
• Round Baby Crib Plans -- John Morrison -- Tuesday, 15 November 2005, at 8:01 a.m.
  1 message
• Uniplane Cutters -- Dale Bushnell -- Thursday, 17 November 2005, at 1:59 a.m.
  9 messages -- Newest posted Tuesday, 5 May 2009, at 7:26 p.m.
• General 130 planer cutterhead -- NickB -- Thursday, 17 November 2005, at 9:42 p.m.
  1 message
• WTB: Oneway Talon Chuck Key -- Jake (SoMN) -- Sunday, 20 November 2005, at 11:28 a.m.
  1 message
• Table with Secret Locking Drawer -- Dawn -- Monday, 21 November 2005, at 5:16 p.m.
  1 message
• looking for a air filter -- Justin -- Wednesday, 23 November 2005, at 7:47 a.m.
  1 message
• cradle plans -- Ken Murphy -- Thursday, 24 November 2005, at 10:02 p.m.
  3 messages -- Newest posted Tuesday, 6 December 2005, at 9:47 p.m.
• Record 050 -- Joel Casto -- Thursday, 24 November 2005, at 11:28 p.m.
  1 message
• WTB Klein Threading Jig -- Kelly Marr -- Friday, 25 November 2005, at 8:41 a.m.
  2 messages -- Newest posted Saturday, 26 November 2005, at 1:09 a.m.
• UNIFENCE RAIL -- Wayne -- Friday, 25 November 2005, at 11:43 a.m.
  3 messages -- Newest posted Friday, 25 November 2005, at 3:50 p.m.
• Xylophone plans -- K. Goring -- Monday, 28 November 2005, at 8:37 p.m.
  3 messages -- Newest posted Wednesday, 30 November 2005, at 4:06 p.m.
• Festool MFT 800 -- Ron -- Tuesday, 29 November 2005, at 7:24 p.m.
  2 messages -- Newest posted Wednesday, 30 November 2005, at 5:18 p.m.
• air dried basswood -- Ben Leclerc -- Wednesday, 30 November 2005, at 8:49 p.m.
  3 messages -- Newest posted Sunday, 25 December 2005, at 1:25 p.m.
• WTB Stanley #51 Spokeshave cap & cap screw -- David Turner -- Thursday, 1 December 2005, at 8:45 a.m.
  3 messages -- Newest posted Tuesday, 6 December 2005, at 5:51 p.m.
• Source -- Harford Field, Jr. -- Thursday, 1 December 2005, at 10:27 a.m.
  4 messages -- Newest posted Sunday, 4 December 2005, at 8:56 a.m.
• WTB Bandsaw -- Paul Mackey -- Saturday, 3 December 2005, at 5:01 p.m.
  1 message
• WTB: Figured Wood Blanks for Boxes -- Phil Winn -- Saturday, 3 December 2005, at 7:42 p.m.
  1 message
• birdseye maple -- vance hough -- Monday, 5 December 2005, at 4:47 p.m.
  2 messages -- Newest posted Monday, 5 December 2005, at 6:50 p.m.
• Bloody Box Elder logs -- Joshua Hoffman -- Wednesday, 7 December 2005, at 6:18 p.m.
  2 messages -- Newest posted Wednesday, 11 January 2006, at 3:03 p.m.
• Log Length Cherry Burls -- Joshua Hoffman -- Friday, 9 December 2005, at 5:55 a.m.
  3 messages -- Newest posted Tuesday, 20 December 2005, at 5:41 p.m.
• delta shaper parts -- hugh -- Friday, 9 December 2005, at 11:32 a.m.
  1 message
• hollow chisel mortise bits & sharpener -- Paul Rubas -- Tuesday, 13 December 2005, at 10:47 p.m.
  2 messages -- Newest posted Wednesday, 14 December 2005, at 11:33 a.m.
• Push cap nuts in a non-hardware store size. *LINK* -- David Breth -- Wednesday, 14 December 2005, at 5:28 p.m.
  2 messages -- Newest posted Sunday, 25 December 2005, at 9:07 p.m.
• Longworth chuck -- oneway -- Thursday, 15 December 2005, at 2:54 p.m.
  2 messages -- Newest posted Tuesday, 17 January 2006, at 4:39 p.m.
• Rockwell Delta Radial Arm Saw -- Leon Gauvreau -- Saturday, 17 December 2005, at 4:32 p.m.
  3 messages -- Newest posted Sunday, 2 April 2006, at 1:13 p.m.
• Plans for simple wooden toy cars -- J. Schueltz -- Saturday, 17 December 2005, at 4:37 p.m.
  2 messages -- Newest posted Sunday, 25 December 2005, at 7:57 p.m.
• wtb molder & jointer -- joe capasso -- Monday, 19 December 2005, at 9:27 p.m.
  1 message
• Cottonwood roots -- Tom Klutz -- Wednesday, 21 December 2005, at 3:27 p.m.
  1 message
• Turbinaire HVLP Sprayer -- Ron Milbach -- Thursday, 22 December 2005, at 10:07 a.m.
  2 messages -- Newest posted Friday, 23 December 2005, at 4:06 p.m.
• woodworking class ?? -- Colby -- Monday, 26 December 2005, at 2:26 p.m.
  1 message
• table saw safety switch -- vance hough -- Monday, 26 December 2005, at 5:21 p.m.
  2 messages -- Newest posted Monday, 26 December 2005, at 6:42 p.m.
• WTB -- Bob Flood -- Tuesday, 27 December 2005, at 10:07 a.m.
  1 message
• Wanted - Stanley 4 1/2 Plane -- Ralph Lipeles -- Tuesday, 27 December 2005, at 4:55 p.m.
  1 message
• veneer -- jeremy -- Wednesday, 28 December 2005, at 6:51 p.m.
  2 messages -- Newest posted Saturday, 31 December 2005, at 6:36 p.m.
• brass knurled knobs -- peter kolb -- Wednesday, 28 December 2005, at 8:50 p.m.
  3 messages -- Newest posted Thursday, 29 December 2005, at 9:36 p.m.
• LAthe tools -- Arw01 -- Friday, 30 December 2005, at 9:57 a.m.
  1 message
• how to cut a wall frame -- John -- Sunday, 1 January 2006, at 4:00 p.m.
  2 messages -- Newest posted Monday, 2 January 2006, at 9:33 a.m.
• Patterns for r/panel doors -- Pappy -- Monday, 2 January 2006, at 10:58 a.m.
  1 message
• Oak beadboard plywood -- Herb Coulter -- Wednesday, 4 January 2006, at 8:30 p.m.
  1 message
• Gold plating -- Nancy Kyle -- Thursday, 5 January 2006, at 11:26 a.m.
  2 messages -- Newest posted Friday, 6 January 2006, at 11:23 a.m.
• indoor teak furniture finishing -- jay -- Friday, 6 January 2006, at 6:44 p.m.
  1 message
• Looking for Flame box elder -- ob obrien In Pensacola -- Saturday, 7 January 2006, at 10:10 a.m.
  1 message
• woodcarving patterns -- weoman -- Sunday, 8 January 2006, at 1:12 p.m.
  1 message
• Union jointer parts -- Graham -- Sunday, 8 January 2006, at 9:33 p.m.
  2 messages -- Newest posted Tuesday, 10 January 2006, at 2:03 p.m.
• Really wide (19") walnut or cherry in NE? -- James Watriss -- Monday, 9 January 2006, at 9:14 a.m.
  4 messages -- Newest posted Sunday, 12 February 2006, at 6:51 p.m.
• 6" Face plate for PM3520 -- DougJ in Crawfordsville, IN -- Tuesday, 10 January 2006, at 10:46 p.m.
  4 messages -- Newest posted Tuesday, 17 January 2006, at 9:41 a.m.
• Complete set of Fine Woodworking.. -- Phil Winn -- Thursday, 12 January 2006, at 9:13 p.m.
  3 messages -- Newest posted Sunday, 5 February 2006, at 2:01 a.m.
• Looking for 3" Face plate for PM3520 -- DougJ in Crawfordsville, IN -- Sunday, 15 January 2006, at 12:11 a.m.
  1 message
• Biesemeyer Rails& Guide Tube -- Terry Peal -- Sunday, 15 January 2006, at 7:12 p.m.
  1 message
• 1/8" Square Boxwood Stringing -- Ron -- Monday, 16 January 2006, at 9:58 a.m.
  2 messages -- Newest posted Wednesday, 18 January 2006, at 5:02 p.m.
• Boice-Crane 6" jointer -- Satch -- Monday, 16 January 2006, at 12:50 p.m.
  4 messages -- Newest posted Sunday, 28 January 2007, at 4:49 p.m.
• FWW Drill Press article -- Martin Suelzen -- Tuesday, 17 January 2006, at 11:25 p.m.
  3 messages -- Newest posted Friday, 20 January 2006, at 8:36 p.m.
• Porch swing plans -- John Murphy -- Wednesday, 18 January 2006, at 4:01 p.m.
  1 message
• Roll Top desk repair in Los Angeles area -- Marc -- Wednesday, 18 January 2006, at 5:59 p.m.
  2 messages -- Newest posted Saturday, 11 February 2006, at 2:23 p.m.
• Panel Saw in Seattle Area -- Jonathan -- Wednesday, 18 January 2006, at 6:40 p.m.
  1 message
• Redwood -- James Brooks in GA. -- Wednesday, 18 January 2006, at 8:20 p.m.
  2 messages -- Newest posted Monday, 6 March 2006, at 9:43 a.m.
• belt clamp -- Paul Waddle -- Thursday, 19 January 2006, at 6:13 a.m.
  4 messages -- Newest posted Saturday, 21 January 2006, at 5:33 a.m.
• WTB Jet Mini Lathe Stand- w/casters -- Terrell Bowen - Georgia -- Monday, 23 January 2006, at 5:32 p.m.
  1 message
• Looking for a Recip. Power Carver -- Greg Haugen -- Monday, 23 January 2006, at 8:01 p.m.
  2 messages -- Newest posted Tuesday, 24 January 2006, at 10:34 a.m.
• looking for a Nova Mercury Mini Lathe -- ob obrien In Pensacola -- Tuesday, 24 January 2006, at 8:17 p.m.
  1 message
• Tote for Sargent VBM 22 -- Thomas Williams - Columbus -- Tuesday, 24 January 2006, at 9:56 p.m.
  1 message
• Jaw Slide for Nova Chuck -- Juergen -- Wednesday, 25 January 2006, at 10:30 p.m.
  1 message
• Roto Carve contour shaper -- Paul Waddle -- Thursday, 26 January 2006, at 6:50 a.m.
  8 messages -- Newest posted Tuesday, 22 May 2007, at 8:04 p.m.
• carbide burnisher -- peter kolb -- Saturday, 28 January 2006, at 9:30 p.m.
  2 messages -- Newest posted Friday, 3 February 2006, at 2:44 p.m.
• polyethylene -- Otto Schwab -- Sunday, 29 January 2006, at 1:54 p.m.
  2 messages -- Newest posted Sunday, 29 January 2006, at 5:02 p.m.
• looking for millroute reducer attachment -- Paul Waddle -- Monday, 30 January 2006, at 10:09 a.m.
  1 message
• Ebac LD800 -- david halden -- Wednesday, 1 February 2006, at 5:50 p.m.
  4 messages -- Newest posted Saturday, 4 February 2006, at 4:41 p.m.
• Bartley gel varnish -- John Jussel -- Friday, 3 February 2006, at 8:53 p.m.
  2 messages -- Newest posted Saturday, 4 February 2006, at 4:42 p.m.
• Special Adirondack chair plans -- Bill Turpin in WNC mountains -- Sunday, 5 February 2006, at 8:48 p.m.
  3 messages -- Newest posted Monday, 6 February 2006, at 11:14 p.m.
• Need Help Spring Hill, Florida -- Ted -- Monday, 6 February 2006, at 7:24 p.m.
  2 messages -- Newest posted Sunday, 12 March 2006, at 3:59 p.m.
• WTB: Rotary Phase Converter -- Don Luttmer -- Wednesday, 8 February 2006, at 2:00 p.m.
  2 messages -- Newest posted Tuesday, 28 February 2006, at 12:02 p.m.
• wtb virutex eb 25 edge bander -- jeff miller -- Saturday, 11 February 2006, at 7:14 a.m.
  1 message
• planer knives -- jeff -- Sunday, 12 February 2006, at 9:54 a.m.
  2 messages -- Newest posted Monday, 13 February 2006, at 11:39 a.m.
• 12" + disc from smoked disc sander.. -- Ron Bauman -- Monday, 13 February 2006, at 11:54 a.m.
  1 message
• Lathe duplicator -- OB OBrien In Pensacola -- Monday, 13 February 2006, at 12:10 p.m.
  2 messages -- Newest posted Monday, 27 March 2006, at 8:03 a.m.
• Need Record 044 Planer Blades -- jeff -- Wednesday, 15 February 2006, at 9:06 a.m.
  1 message
• blower motor for shop built air filter -- Ned Bulken -- Friday, 17 February 2006, at 2:48 a.m.
  6 messages -- Newest posted Sunday, 19 February 2006, at 10:01 a.m.
• Delta 22-540 12 inch planer knife setter gauge -- DocJim...Fayetteville, NY -- Saturday, 18 February 2006, at 6:16 p.m.
  1 message
• Craftsman Router Crafter: (part) -- Mr. Hambone -- Sunday, 19 February 2006, at 11:56 a.m.
  3 messages -- Newest posted Monday, 20 February 2006, at 9:21 a.m.
• Looking for a video for a Vega ProLathe duplicator -- OB OBrien In Pensacola -- Sunday, 19 February 2006, at 5:53 p.m.
  1 message
• Craftsman 12" Woodturning Lathe Accessory -- Grady Fisher -- Tuesday, 21 February 2006, at 4:07 a.m.
  5 messages -- Newest posted Saturday, 25 February 2006, at 7:29 p.m.
• craftsman table saw--unknown -- rege mcnicholas -- Wednesday, 22 February 2006, at 6:41 a.m.
  2 messages -- Newest posted Monday, 27 February 2006, at 8:42 p.m.
• WTB Old Dewalt RAS -- Mike Fitterling -- Wednesday, 22 February 2006, at 11:05 a.m.
  3 messages -- Newest posted Sunday, 12 March 2006, at 10:45 a.m.
• WTB Delta Tool Rest Base *PIC* -- Greg in Muscatine IA -- Monday, 27 February 2006, at 11:06 a.m.
  2 messages -- Newest posted Tuesday, 7 March 2006, at 8:15 p.m.
• douglas fir sources -- gregg o'malley -- Monday, 27 February 2006, at 9:28 p.m.
  2 messages -- Newest posted Monday, 27 March 2006, at 11:38 p.m.
• Laguna LT 16 Bandsaw *NM* -- bob myers -- Thursday, 2 March 2006, at 9:05 p.m.
  1 message
• new life wood conditioners -- dave brame -- Monday, 6 March 2006, at 8:58 p.m.
  1 message
• Dewalt Radial Arm Saw model GW -- Warren Muse, Earlysville VA -- Wednesday, 8 March 2006, at 8:10 a.m.
  3 messages -- Newest posted Tuesday, 14 March 2006, at 7:25 p.m.
• chainsaw mill -- chadspeg -- Friday, 10 March 2006, at 11:34 p.m.
  2 messages -- Newest posted Saturday, 25 March 2006, at 9:33 a.m.
• Corner Cabinet Computer Plans -- Ron -- Saturday, 11 March 2006, at 7:24 a.m.
  1 message
• Hinges -- Dean Peters -- Sunday, 12 March 2006, at 12:38 p.m.
  1 message
• DREMMEL TOOL -- dan spangler -- Wednesday, 15 March 2006, at 2:16 p.m.
  3 messages -- Newest posted Thursday, 16 March 2006, at 11:12 p.m.
• cremation box plan -- staci watkins -- Thursday, 16 March 2006, at 1:26 a.m.
  1 message
• Looking for Unifence rail -- Alan in Little Washington (NC) -- Thursday, 16 March 2006, at 11:45 p.m.
  1 message
• Help on Voc Ed for Orphans -- ed pier -- Friday, 17 March 2006, at 11:33 a.m.
  5 messages -- Newest posted Friday, 7 April 2006, at 2:22 p.m.
• Need a belt for a Wards motorized 8" saw -- Bill Porter -- Friday, 17 March 2006, at 8:58 p.m.
  5 messages -- Newest posted Sunday, 16 April 2006, at 4:36 p.m.
• Power Feed -- Bennett Willis -- Saturday, 18 March 2006, at 6:53 p.m.
  1 message
• Turning blanks in Gettysburg -- Mark Trenier -- Sunday, 19 March 2006, at 10:27 a.m.
  3 messages -- Newest posted Thursday, 23 March 2006, at 7:45 p.m.
• Alaskan Mill -- shanelyon -- Tuesday, 21 March 2006, at 11:56 a.m.
  1 message
• Transitional Lever cap for 2-5/8" width -- HC Sakman @ Victoria, BC -- Friday, 24 March 2006, at 3:03 p.m.
  2 messages -- Newest posted Thursday, 20 April 2006, at 2:58 a.m.
• craftsman# 103.0213 table fence & rails -- alton long -- Sunday, 26 March 2006, at 9:05 p.m.
  2 messages -- Newest posted Monday, 27 March 2006, at 10:47 p.m.
• half nuts -- Paul Waddle -- Tuesday, 28 March 2006, at 6:17 a.m.
  2 messages -- Newest posted Tuesday, 28 March 2006, at 7:56 a.m.
• WTB Multi Router -- Don L. -- Tuesday, 28 March 2006, at 1:29 p.m.
  2 messages -- Newest posted Wednesday, 29 March 2006, at 2:01 p.m.
• Dovetail machine -- RonGirard -- Thursday, 30 March 2006, at 2:07 p.m.
  2 messages -- Newest posted Thursday, 30 March 2006, at 2:07 p.m.
• Roble Wood -- Mike G. -- Saturday, 1 April 2006, at 11:09 p.m.
  3 messages -- Newest posted Friday, 14 April 2006, at 1:54 p.m.
• jewler's hand saw -- Paul Waddle -- Sunday, 2 April 2006, at 1:48 p.m.
  5 messages -- Newest posted Saturday, 15 April 2006, at 9:40 a.m.
• Drive belt old planer -- Scott Wondrow -- Monday, 3 April 2006, at 9:03 p.m.
  4 messages -- Newest posted Tuesday, 24 October 2006, at 5:11 p.m.
• Wanted: Stanley 700 series Chisel 1" & wider -- HC Sakman @ Victoria, BC -- Thursday, 6 April 2006, at 4:40 p.m.
  1 message
• mdf question? -- Brian and Lori -- Thursday, 6 April 2006, at 8:36 p.m.
  4 messages -- Newest posted Friday, 7 April 2006, at 9:38 p.m.
• electric log splitter -- chadspeg -- Friday, 7 April 2006, at 12:22 p.m.
  1 message
• Dual Drum Sander -- Matthew -- Tuesday, 11 April 2006, at 6:58 p.m.
  2 messages -- Newest posted Friday, 14 April 2006, at 9:00 p.m.
• Morse taper -- Roger Harris -- Wednesday, 12 April 2006, at 10:02 p.m.
  6 messages -- Newest posted Friday, 19 May 2006, at 7:07 p.m.
• Secretary Desk -- Dalen Burr -- Saturday, 15 April 2006, at 10:34 a.m.
  1 message
• Doormaking -- John -- Tuesday, 18 April 2006, at 2:44 p.m.
  2 messages -- Newest posted Thursday, 20 April 2006, at 10:28 p.m.
• shaper spindle for Router Bits -- Doug -- Wednesday, 19 April 2006, at 12:13 p.m.
  3 messages -- Newest posted Monday, 8 May 2006, at 2:31 p.m.
• WTB: No. 2 Lever Cap for Frankenplane -- Joe Hurst -- Thursday, 27 April 2006, at 11:34 a.m.
  1 message
• Miller Falls Co #320 saw blade needed -- Missy Crews -- Saturday, 29 April 2006, at 2:29 p.m.
  3 messages -- Newest posted Sunday, 7 May 2006, at 6:28 a.m.
• Manual for a Craftsman biscuit jointer -- Bill Houghton, IT IS Spring in Sebastopol, CA -- Sunday, 30 April 2006, at 5:49 p.m.
  1 message
• Tool Activated power outlet -- Mike D -- Tuesday, 2 May 2006, at 2:25 p.m.
  4 messages -- Newest posted Monday, 5 June 2006, at 3:17 p.m.
• Hand thread chasing tools -- OB OBrien In Pensacola -- Tuesday, 2 May 2006, at 8:03 p.m.
  3 messages -- Newest posted Sunday, 28 May 2006, at 10:15 a.m.
• PULLEY -- Doug -- Wednesday, 3 May 2006, at 11:47 a.m.
  1 message
• Beisemeyer -- DWA -- Monday, 8 May 2006, at 4:32 p.m.
  1 message
• toxic woods -- paul wiser -- Monday, 8 May 2006, at 11:16 p.m.
  2 messages -- Newest posted Monday, 8 May 2006, at 11:54 p.m.
• Windsor Chair tools -- Philip Duffy -- Tuesday, 9 May 2006, at 6:12 a.m.
  2 messages -- Newest posted Tuesday, 9 May 2006, at 8:12 a.m.
• woodmaster 718 -- Daniel Shari -- Tuesday, 9 May 2006, at 3:02 p.m.
  1 message
• Slider -- dave in texas -- Tuesday, 9 May 2006, at 6:49 p.m.
  1 message
• blower -- pat craig -- Wednesday, 10 May 2006, at 11:51 p.m.
  1 message
• baby furniture -- billy -- Thursday, 11 May 2006, at 5:38 p.m.
  1 message
• WTB: 6" Jointer in MidWest -- burrellski -- Friday, 12 May 2006, at 11:03 a.m.
  1 message
• Eric Anton Berg -- Brian Lyman -- Monday, 15 May 2006, at 9:47 p.m.
  2 messages -- Newest posted Friday, 19 May 2006, at 12:22 p.m.
• looking for three spindle shapers and other tools -- John Minter -- Monday, 15 May 2006, at 10:47 p.m.
  1 message
• Faceplate -- Doug Ridley -- Friday, 19 May 2006, at 11:41 a.m.
  1 message
• scroll chuck adapter for shopsmith -- bernie feinerman -- Saturday, 20 May 2006, at 5:49 p.m.
  2 messages -- Newest posted Thursday, 25 May 2006, at 3:24 p.m.
• mortising bits -- Doug -- Monday, 22 May 2006, at 12:10 p.m.
  2 messages -- Newest posted Tuesday, 23 May 2006, at 1:40 p.m.
• 14" Reliant Bandsaw -- Don Dubiel -- Wednesday, 24 May 2006, at 8:07 a.m.
  3 messages -- Newest posted Monday, 4 December 2006, at 9:19 a.m.
• Hand Saw Sharpening -- Joel Casto -- Friday, 26 May 2006, at 1:42 a.m.
  2 messages -- Newest posted Friday, 26 May 2006, at 10:11 p.m.
• zero clearance insert -- Into Wood -- Friday, 26 May 2006, at 12:12 p.m.
  2 messages -- Newest posted Monday, 29 May 2006, at 3:35 p.m.
• WTB: 8/4 Eastern White Pine in NJ -- James Galvin -- Saturday, 27 May 2006, at 9:45 p.m.
  3 messages -- Newest posted Sunday, 28 May 2006, at 9:06 a.m.
• clips for chain pulls -- james decker -- Monday, 29 May 2006, at 5:02 p.m.
  3 messages -- Newest posted Monday, 29 May 2006, at 10:48 p.m.
• Looking for Pie Safe Plans -- Steve from Jobstown, NJ -- Tuesday, 30 May 2006, at 6:08 p.m.
  1 message
• Looking for a source -- Tucker Nason -- Thursday, 1 June 2006, at 4:25 p.m.
  2 messages -- Newest posted Thursday, 1 June 2006, at 7:53 p.m.
• powermatic lathe 90 parts -- Dale Brady -- Saturday, 3 June 2006, at 6:25 p.m.
  6 messages -- Newest posted Saturday, 30 September 2006, at 1:46 a.m.
• Looking for the following??? -- Rory -- Wednesday, 7 June 2006, at 9:22 a.m.
  3 messages -- Newest posted Thursday, 8 June 2006, at 4:19 p.m.
• Need paint heater -- Pete Monfre -- Friday, 9 June 2006, at 11:01 a.m.
  1 message
• Shop-made edge sander, Shop Notes #37 article -- Jon -- Saturday, 10 June 2006, at 4:01 p.m.
  2 messages -- Newest posted Tuesday, 13 June 2006, at 2:07 p.m.
• WTB-Router Lift -- Brian Philipp -- Sunday, 11 June 2006, at 9:37 a.m.
  1 message
• Bowl Blanks -- Mark Trenier -- Sunday, 11 June 2006, at 1:18 p.m.
  2 messages -- Newest posted Tuesday, 14 November 2006, at 6:19 a.m.
• rocking horse plans -- len thomas -- Wednesday, 14 June 2006, at 10:48 a.m.
  1 message
• Delta 36-729 Table Saw -- Tim Clarke -- Wednesday, 14 June 2006, at 3:47 p.m.
  2 messages -- Newest posted Friday, 30 June 2006, at 9:30 a.m.
• Double shaft motor -- Roy Anderson -- Thursday, 15 June 2006, at 6:36 p.m.
  3 messages -- Newest posted Saturday, 15 July 2006, at 12:18 a.m.
• wanted: Texas ebony -- John Stys -- Monday, 19 June 2006, at 8:42 p.m.
  1 message
• WTB: Marples, English Pattern Screwdrivers -- Ronald Young -- Friday, 23 June 2006, at 2:55 p.m.
  1 message
• Woodworking CD on Benefits Auction *NM* *LINK* -- Bill Houghton, finally Spring!! in Sebastopol, CA -- Saturday, 24 June 2006, at 4:25 p.m.
  1 message
• French doors - LEXAN? -- Dan Manturi -- Tuesday, 27 June 2006, at 2:10 p.m.
  3 messages -- Newest posted Thursday, 29 June 2006, at 1:18 p.m.
• Delta Milwaukee Red Switchplate. *PIC* -- Bret -- Wednesday, 28 June 2006, at 2:39 a.m.
  1 message
• Steel Wool Wax -- Fred Shier -- Sunday, 2 July 2006, at 8:51 p.m.
  3 messages -- Newest posted Wednesday, 9 August 2006, at 2:05 p.m.
• Rockwell 8" jointer parts -- Rick W -- Monday, 3 July 2006, at 6:46 p.m.
  4 messages -- Newest posted Wednesday, 16 August 2006, at 10:00 p.m.
• need 3/4 X 16 to 1 X 8 lathe spindle adapter -- OB O'Brien -- Wednesday, 5 July 2006, at 10:00 a.m.
  3 messages -- Newest posted Thursday, 6 July 2006, at 10:33 a.m.
• Axe Handles for older stuff -- Al Kapocius -- Friday, 7 July 2006, at 12:38 p.m.
  3 messages -- Newest posted Friday, 7 July 2006, at 5:00 p.m.
• accessories for the Mill-route -- Paul Waddle -- Tuesday, 11 July 2006, at 4:59 p.m.
  3 messages -- Newest posted Saturday, 29 July 2006, at 6:01 p.m.
• Hive bodies *PIC* -- JOSEPH J. LERICHE -- Friday, 14 July 2006, at 3:06 p.m.
  1 message
• maple plywood -- Bob Edenhofer -- Friday, 14 July 2006, at 3:18 p.m.
  1 message
• Rockwell Model 14 Bandsaw *PIC* -- J. Hogue -- Tuesday, 18 July 2006, at 10:55 a.m.
  2 messages -- Newest posted Saturday, 12 August 2006, at 8:40 p.m.
• dulcimer stand plans -- Donald Freriks -- Tuesday, 18 July 2006, at 1:17 p.m.
  1 message
• Looking for Woodwork magazine issues -- Bill Houghton, Summer heat in Sebastopol, CA -- Wednesday, 19 July 2006, at 11:46 p.m.
  1 message
• rockwell/delta uniplane -- joe mrad -- Thursday, 20 July 2006, at 4:32 a.m.
  2 messages -- Newest posted Thursday, 20 July 2006, at 9:01 a.m.
• Dewalt 1370 Radial Arm Saw Manual -- Stephen Weeks -- Friday, 21 July 2006, at 6:43 p.m.
  1 message
• Woodmaster 500 Bandsaw -- Charlie -- Friday, 21 July 2006, at 9:15 p.m.
  2 messages -- Newest posted Monday, 18 September 2006, at 4:28 p.m.
• Craftsman Builders Saw -- Doug -- Sunday, 23 July 2006, at 6:54 p.m.
  2 messages -- Newest posted Saturday, 12 August 2006, at 8:37 p.m.
• Screws, Bolts, and Washers -- Phillip -- Sunday, 23 July 2006, at 9:22 p.m.
  2 messages -- Newest posted Sunday, 23 July 2006, at 10:27 p.m.
• moisture meters -- del schisler -- Thursday, 27 July 2006, at 7:50 a.m.
  1 message
• Pop Woodworking backissue -- les winter -- Friday, 28 July 2006, at 5:48 a.m.
  1 message
• Boice Crane spindle sander -- Geoffrey Fitzwilliam -- Sunday, 30 July 2006, at 12:36 p.m.
  2 messages -- Newest posted Sunday, 30 July 2006, at 9:26 p.m.
• Drill Press & Jointer -- Brian M. Wildt -- Tuesday, 1 August 2006, at 1:53 p.m.
  3 messages -- Newest posted Wednesday, 2 August 2006, at 1:26 p.m.
• want unneeded videos and magazines -- David -- Tuesday, 1 August 2006, at 3:25 p.m.
  1 message
• P+C 690 Motor -- George@Colonel's Workshop -- Tuesday, 1 August 2006, at 7:51 p.m.
  1 message
• jet 16" wood lathe -- bob davis -- Wednesday, 2 August 2006, at 5:39 p.m.
  1 message
• WTB (or swap) Incra 92" rails -- Bill Esposito, NH -- Friday, 4 August 2006, at 4:23 p.m.
  1 message
• Chuck -- JOHN VITOSKY -- Friday, 11 August 2006, at 7:10 a.m.
  5 messages -- Newest posted Saturday, 30 September 2006, at 1:52 a.m.
• band saw riser kit -- paul waddle -- Friday, 11 August 2006, at 2:51 p.m.
  1 message
• shaper table belt. -- JOHN VITOSKY -- Friday, 11 August 2006, at 3:01 p.m.
  4 messages -- Newest posted Saturday, 12 August 2006, at 10:28 a.m.
• wing back chair -- steve walker -- Saturday, 12 August 2006, at 10:58 p.m.
  2 messages -- Newest posted Sunday, 13 August 2006, at 4:35 a.m.
• ipopper woods -- paul wiser -- Sunday, 13 August 2006, at 1:24 a.m.
  3 messages -- Newest posted Wednesday, 16 August 2006, at 3:12 p.m.
• Looking for used JDS Multi-Router *NM* -- HC Sakman - Victoria, BC -- Sunday, 13 August 2006, at 4:21 p.m.
  3 messages -- Newest posted Sunday, 8 October 2006, at 10:19 a.m.
• Powercrafter -- Doug Ridley -- Tuesday, 15 August 2006, at 5:31 p.m.
  2 messages -- Newest posted Thursday, 21 December 2006, at 9:28 a.m.
• Plantation Shutters -- Fred L Swann -- Wednesday, 16 August 2006, at 11:12 a.m.
  4 messages -- Newest posted Sunday, 20 August 2006, at 5:41 p.m.
• McNaughton Bowl Corer Set -- Greg Haugen -- Monday, 21 August 2006, at 9:21 a.m.
  1 message
• Tail Stock Assembly -- Bill Nichols -- Wednesday, 23 August 2006, at 9:38 a.m.
  2 messages -- Newest posted Thursday, 24 August 2006, at 8:27 a.m.
• Looking for Woodwork magazine issues -- Bill Houghton, foggy mornings in Sebastopol, CA -- Sunday, 27 August 2006, at 3:42 p.m.
  2 messages -- Newest posted Monday, 28 August 2006, at 1:06 a.m.
• Lyle Jamieson hollowing rig -- John E. Stys -- Wednesday, 30 August 2006, at 8:37 p.m.
  3 messages -- Newest posted Tuesday, 5 September 2006, at 7:52 a.m.
• Fine Woodworking to round out my collection -- arw01 -- Saturday, 2 September 2006, at 7:09 p.m.
  2 messages -- Newest posted Wednesday, 27 September 2006, at 8:30 a.m.
• Looking for a Bosch 1591 EVSK -- Roy Anderson -- Sunday, 3 September 2006, at 3:23 p.m.
  1 message
• jointer parts -- Michael Cianchette -- Monday, 4 September 2006, at 3:04 p.m.
  5 messages -- Newest posted Wednesday, 13 September 2006, at 9:13 a.m.
• wooden piggy bank -- Kevin Burlely -- Tuesday, 5 September 2006, at 1:12 p.m.
  1 message
• old, good quality carving chisels -- Jamey Amrine in Ann Arbor -- Tuesday, 12 September 2006, at 10:42 a.m.
  5 messages -- Newest posted Saturday, 16 September 2006, at 1:51 p.m.
• Glue Bottle -- Ray Binnicker -- Tuesday, 12 September 2006, at 9:14 p.m.
  2 messages -- Newest posted Wednesday, 13 September 2006, at 8:33 a.m.
• accurate table saw miter cuts -- Ron Willis -- Thursday, 14 September 2006, at 3:57 p.m.
  2 messages -- Newest posted Friday, 15 September 2006, at 7:25 a.m.
• WANTED Lever Cap for Stanley No.2 Smooth Plane -- Clint Jones -- Saturday, 16 September 2006, at 5:19 p.m.
  2 messages -- Newest posted Sunday, 17 September 2006, at 12:07 p.m.
• Harley Replica Engine -- Carol P. -- Tuesday, 19 September 2006, at 9:40 p.m.
  1 message
• Nova 300 0 belt -- Tom Benham -- Tuesday, 19 September 2006, at 11:55 p.m.
  2 messages -- Newest posted Friday, 22 September 2006, at 3:09 p.m.
• RELIANT 10" PLANER BELT -- Tim433 -- Wednesday, 20 September 2006, at 2:44 a.m.
  3 messages -- Newest posted Wednesday, 20 September 2006, at 5:43 p.m.
• Power Press Pipe Clamps -- Diz -- Sunday, 24 September 2006, at 10:38 p.m.
  1 message
• service manuel 14'reliant bandsaw *NM* -- D Gallimore -- Monday, 25 September 2006, at 12:36 p.m.
  1 message
• service manuel 14'reliant bandsaw -- D Gallimore -- Monday, 25 September 2006, at 12:42 p.m.
  2 messages -- Newest posted Monday, 25 September 2006, at 4:23 p.m.
• Lathe headstock spindle -- Phil Joines Krum, Tx -- Saturday, 30 September 2006, at 2:15 a.m.
  9 messages -- Newest posted Wednesday, 13 December 2006, at 6:03 p.m.
• WTB - Wood Mag - #14 & #124 -- Gary Ratajczak -- Monday, 2 October 2006, at 3:35 p.m.
  4 messages -- Newest posted Wednesday, 25 October 2006, at 8:03 p.m.
• WTB my missing FWW issues -- arw01 -- Thursday, 5 October 2006, at 9:41 a.m.
  1 message
• Bandsaw fence -- Doug Ridley -- Saturday, 7 October 2006, at 11:44 a.m.
  1 message
• Jet DC model 650 -- peter kolb -- Tuesday, 10 October 2006, at 7:37 p.m.
  1 message
• mortise bits -- Jay -- Tuesday, 10 October 2006, at 9:24 p.m.
  1 message
• Millers Falls 800 Circular Hand Saw -- Ian -- Wednesday, 11 October 2006, at 1:57 a.m.
  3 messages -- Newest posted Wednesday, 18 October 2006, at 9:56 p.m.
• Bush Oil for wood finish -- Jerry from Lapel In. -- Thursday, 12 October 2006, at 9:39 a.m.
  2 messages -- Newest posted Thursday, 12 October 2006, at 7:16 p.m.
• horizental moritser -- Dennis -- Thursday, 12 October 2006, at 7:54 p.m.
  2 messages -- Newest posted Friday, 13 October 2006, at 8:08 a.m.
• Bandsaw Dust Collection -- Chris in KC -- Friday, 13 October 2006, at 11:32 p.m.
  3 messages -- Newest posted Friday, 17 November 2006, at 10:15 a.m.
• Rockwell bandsaw manual for 28-300 -- Harvey Winegar -- Monday, 16 October 2006, at 3:45 p.m.
  3 messages -- Newest posted Thursday, 19 October 2006, at 10:40 a.m.
• Duplicating lathe wanted -- OB O'Brien -- Thursday, 19 October 2006, at 12:10 p.m.
  1 message
• Wood Source -- darrell mason -- Friday, 20 October 2006, at 6:29 p.m.
  1 message
• bandsaw tension gage -- Jim Pugh, Elyria, OH -- Friday, 20 October 2006, at 8:02 p.m.
  5 messages -- Newest posted Monday, 23 October 2006, at 7:57 a.m.
• delta 22-540 planer -- Bonnie Ferrell -- Sunday, 22 October 2006, at 6:55 p.m.
  2 messages -- Newest posted Monday, 23 October 2006, at 6:07 p.m.
• Bush Oil Found (Thanks Ellis) -- Jerry from Lapel In. -- Sunday, 22 October 2006, at 11:54 p.m.
  1 message
• straight edges -- Ralph J. Sucharski -- Wednesday, 25 October 2006, at 1:01 p.m.
  2 messages -- Newest posted Thursday, 26 October 2006, at 9:15 a.m.
• roll top bread box -- Dan Moore -- Wednesday, 25 October 2006, at 3:03 p.m.
  1 message
• Leigh Jig -- Kelly Marr -- Thursday, 26 October 2006, at 6:38 p.m.
  1 message
• Totes for stanley planes -- Clint Jones -- Sunday, 29 October 2006, at 8:15 p.m.
  5 messages -- Newest posted Monday, 30 October 2006, at 8:23 p.m.
• Rockwell 46-450 accessories -- HeatherA in Alaska -- Sunday, 29 October 2006, at 9:58 p.m.
  2 messages -- Newest posted Tuesday, 31 October 2006, at 10:36 a.m.
• Woodbutning Tools -- Bob Moffett -- Wednesday, 1 November 2006, at 11:38 p.m.
  3 messages -- Newest posted Saturday, 4 November 2006, at 3:06 p.m.
• looking for ewebsite -- paul wiser -- Sunday, 5 November 2006, at 11:13 p.m.
  1 message
• T-124 lathe Video -- OB O'Brien -- Tuesday, 7 November 2006, at 9:28 a.m.
  1 message
• Plate Shelf help -- Gary Schulte -- Tuesday, 7 November 2006, at 11:36 p.m.
  5 messages -- Newest posted Thursday, 9 November 2006, at 1:29 p.m.
• Joint nails -- Leonard Fields -- Friday, 10 November 2006, at 3:44 p.m.
  2 messages -- Newest posted Friday, 10 November 2006, at 6:26 p.m.
• Tote for Stanley 5-8 planes Wanted *NM* -- Clint Jones -- Friday, 10 November 2006, at 8:09 p.m.
  1 message
• Book hunting -- Michael Shelley -- Saturday, 11 November 2006, at 9:52 p.m.
  1 message
• delta access door -- jim -- Sunday, 12 November 2006, at 11:22 a.m.
  1 message
• New Yankee Plans/Video -- Murph -- Monday, 13 November 2006, at 11:11 p.m.
  2 messages -- Newest posted Tuesday, 14 November 2006, at 6:18 a.m.
• northern white cedar -- Dave Simm -- Tuesday, 14 November 2006, at 6:16 a.m.
  1 message
• dewalt radial saw model 7730 -- harry brotnitsky -- Tuesday, 14 November 2006, at 3:50 p.m.
  1 message
• Looking for Dewalt D-handle router base -- Julian -- Wednesday, 15 November 2006, at 12:35 p.m.
  1 message
• small logs or posts for furniture -- john taylor -- Thursday, 16 November 2006, at 2:59 a.m.
  1 message
• Disston #3 Saw Vise -- Frank Mutchler in Colorado Springs -- Thursday, 16 November 2006, at 8:09 p.m.
  1 message
• Oneway 2436 Lathe -- rae -- Saturday, 18 November 2006, at 9:50 a.m.
  1 message
• RBI 3 in 1 -- Dennis Burke SE Michigan -- Saturday, 18 November 2006, at 8:27 p.m.
  1 message
• WTB: 1 Phase Unisaw Motor (bullet style) -- Nelson -- Sunday, 19 November 2006, at 9:19 a.m.
  1 message
• Plans for kids toy box -- Paul Butz -- Sunday, 19 November 2006, at 10:18 p.m.
  1 message
• PLANER 30 "T0 36"FOR TRACTOR -- Paul Butz -- Sunday, 19 November 2006, at 11:01 p.m.
  1 message
• mail order source for silver solder -- peter kolb -- Monday, 20 November 2006, at 11:17 a.m.
  4 messages -- Newest posted Tuesday, 21 November 2006, at 9:42 a.m.
• Dewalt 7730 Radial Arm Saw -- Silvio -- Monday, 20 November 2006, at 9:18 p.m.
  2 messages -- Newest posted Tuesday, 21 November 2006, at 10:30 a.m.
• mill route parts -- William Jarvis -- Saturday, 25 November 2006, at 1:35 p.m.
  1 message
• Wanted: Frog for Bedrock 603 -- Ralph Lipeles -- Sunday, 26 November 2006, at 6:26 a.m.
  1 message
• Forster brand flat toothpicks -- James Mason -- Sunday, 26 November 2006, at 10:38 a.m.
  3 messages -- Newest posted Sunday, 3 December 2006, at 9:32 p.m.
• Dewalt Radial Arm Saw Model GW1 -- Michael LaPlante -- Tuesday, 28 November 2006, at 12:34 a.m.
  1 message
• Atro nail gun -- Tom O'Connor -- Tuesday, 28 November 2006, at 6:37 p.m.
  2 messages -- Newest posted Wednesday, 29 November 2006, at 7:58 a.m.
• Looking for Woodwork magazine issues -- Bill Houghton, cold mornings, Sebastopol, CA -- Saturday, 2 December 2006, at 9:40 p.m.
  3 messages -- Newest posted Monday, 4 December 2006, at 12:34 p.m.
• Blum hinges -- Larry M -- Monday, 4 December 2006, at 11:14 a.m.
  2 messages -- Newest posted Saturday, 16 December 2006, at 10:28 p.m.
• WTB # 8 and # 4 1/2 Planes -- Vijay Kumar -- Wednesday, 6 December 2006, at 1:07 a.m.
  1 message
• Experienced Finisher Needed!! *LINK* -- Joel - CustomCraft Wood Furniture -- Wednesday, 6 December 2006, at 1:47 p.m.
  1 message
• Wood Source -- Don in Midlothian,TX -- Wednesday, 6 December 2006, at 3:50 p.m.
  1 message
• Looking for Maple Bowl Blanks -- Dan Berger -- Thursday, 7 December 2006, at 7:26 p.m.
  2 messages -- Newest posted Wednesday, 21 February 2007, at 1:28 a.m.
• Mobile base wanted -- David Sparks -- Tuesday, 12 December 2006, at 5:33 p.m.
  2 messages -- Newest posted Thursday, 28 December 2006, at 11:46 a.m.
• Delta Contractor Saw Fence -- Doug Trembath -- Thursday, 14 December 2006, at 5:24 p.m.
  3 messages -- Newest posted Thursday, 21 December 2006, at 1:49 p.m.
• Quisco cactus wood -- Donna Calles -- Friday, 15 December 2006, at 1:39 p.m.
  2 messages -- Newest posted Saturday, 16 December 2006, at 10:25 p.m.
• log dresser -- Peggy -- Saturday, 16 December 2006, at 7:56 a.m.
  2 messages -- Newest posted Saturday, 16 December 2006, at 6:27 p.m.
• Wooden clock -- David -- Saturday, 16 December 2006, at 6:24 p.m.
  2 messages -- Newest posted Saturday, 23 December 2006, at 6:37 p.m.
• chucks -- harold -- Sunday, 17 December 2006, at 8:49 a.m.
  1 message
• WTB: Wormy chestnut or heart pine lumber -- Fred -- Wednesday, 20 December 2006, at 9:41 a.m.
  2 messages -- Newest posted Wednesday, 20 December 2006, at 6:11 p.m.
• Domed Lid Steamer Trunk -- Tony -- Wednesday, 20 December 2006, at 2:23 p.m.
  1 message
• tool sets -- harold -- Thursday, 21 December 2006, at 9:41 p.m.
  2 messages -- Newest posted Saturday, 23 December 2006, at 11:56 a.m.
• Mill-route -- Paul Waddle -- Monday, 25 December 2006, at 8:50 a.m.
  1 message
• Fine Woodworking Mags -- Jim White -- Wednesday, 27 December 2006, at 9:43 a.m.
  2 messages -- Newest posted Tuesday, 23 January 2007, at 10:08 p.m.
• Cherry Wood in the NW -- Bruce Ebling -- Wednesday, 27 December 2006, at 4:51 p.m.
  2 messages -- Newest posted Thursday, 25 January 2007, at 10:06 a.m.
• Bowl Blanks for sale -- Jim Lyons -- Wednesday, 27 December 2006, at 4:59 p.m.
  1 message
• Cabinet Saw -- Bob in NE Ohio -- Thursday, 28 December 2006, at 7:58 a.m.
  4 messages -- Newest posted Monday, 5 February 2007, at 7:07 a.m.
• Dovetail jig -- Barry Madsen -- Friday, 29 December 2006, at 12:27 p.m.
  4 messages -- Newest posted Wednesday, 3 January 2007, at 2:14 p.m.
• CRAFTSMAN SCROLL SAW -- ANGIE -- Sunday, 31 December 2006, at 12:36 a.m.
  12 messages -- Newest posted Friday, 19 January 2007, at 11:05 p.m.
• segmented turning -- Joan Whitehead -- Sunday, 31 December 2006, at 11:27 a.m.
  2 messages -- Newest posted Monday, 1 January 2007, at 10:26 p.m.
• Family Handyman magazines -- kenthg -- Sunday, 31 December 2006, at 1:33 p.m.
  1 message
• Olympic Interior One Step Satin Finish -- Beth -- Sunday, 31 December 2006, at 3:43 p.m.
  1 message
• looking 4: Looking for a "Jet JRB-14 6" Riser Bloc -- Don Guido -- Wednesday, 3 January 2007, at 2:19 a.m.
  1 message
• 4" Grinder w/Arbortech -- Brian Philipp -- Saturday, 6 January 2007, at 9:28 a.m.
  3 messages -- Newest posted Thursday, 11 January 2007, at 1:36 p.m.
• Pin Router -- Bob Reeve -- Saturday, 6 January 2007, at 1:06 p.m.
  3 messages -- Newest posted Monday, 15 January 2007, at 10:46 a.m.
• Unisaw throat plate needed -- Rick Whitehead -- Saturday, 6 January 2007, at 8:14 p.m.
  3 messages -- Newest posted Sunday, 7 January 2007, at 8:38 p.m.
• Dog mailbox patterns -- Critter Comforts -- Friday, 19 January 2007, at 12:34 p.m.
  1 message
• spindle nut -- fred -- Monday, 22 January 2007, at 9:18 p.m.
  2 messages -- Newest posted Tuesday, 23 January 2007, at 9:48 a.m.
• English style shaving horse -- George Tyler,Louisa, VA -- Tuesday, 30 January 2007, at 9:10 a.m.
  3 messages -- Newest posted Wednesday, 31 January 2007, at 8:59 a.m.
• AMT jointer -- Lamar -- Saturday, 3 February 2007, at 5:25 p.m.
  2 messages -- Newest posted Monday, 12 February 2007, at 7:58 a.m.
• reliant band saw parts -- Rich Rogala -- Saturday, 3 February 2007, at 11:47 p.m.
  1 message
• knife blade supplier -- Barry madsen -- Wednesday, 7 February 2007, at 6:15 p.m.
  1 message
• Parts Powermatic mod90 lathe -- Dale Brady -- Thursday, 8 February 2007, at 11:04 a.m.
  1 message
• Table Saw -- Webster Stump -- Thursday, 8 February 2007, at 11:25 p.m.
  2 messages -- Newest posted Friday, 9 February 2007, at 1:29 p.m.
• Bandsaw table -- Dave LaPine -- Friday, 9 February 2007, at 6:53 p.m.
  2 messages -- Newest posted Wednesday, 21 February 2007, at 1:03 a.m.
• Woodsmith Magazine Number 153 -- Alton Long -- Saturday, 10 February 2007, at 3:45 p.m.
  2 messages -- Newest posted Wednesday, 14 February 2007, at 7:24 p.m.
• woodworker wanted -- Ed Irvin -- Saturday, 10 February 2007, at 11:59 p.m.
  2 messages -- Newest posted Monday, 12 February 2007, at 9:30 a.m.
• WTB: Veritas circular saw truing disc *LINK* -- dan mcgarry -- Monday, 12 February 2007, at 9:44 a.m.
  1 message
• mag switches -- wonderer -- Monday, 12 February 2007, at 9:29 p.m.
  2 messages -- Newest posted Friday, 16 February 2007, at 9:25 a.m.
• Multi Router -- Tim Goins -- Tuesday, 13 February 2007, at 1:31 a.m.
  2 messages -- Newest posted Wednesday, 14 February 2007, at 10:16 p.m.
• Woodworking Magazine -- Gary Tenney -- Wednesday, 14 February 2007, at 1:39 a.m.
  3 messages -- Newest posted Monday, 19 February 2007, at 8:11 p.m.
• Need Old Milwaukee -- Chuck Waller -- Saturday, 17 February 2007, at 1:08 p.m.
  1 message
• Wanted: Maydole hammer -- Mike Brady -- Tuesday, 20 February 2007, at 8:31 p.m.
  1 message
• WTB: Book-"Make a Chair From A Tree" -- Ronald E Young -- Tuesday, 20 February 2007, at 10:52 p.m.
  2 messages -- Newest posted Sunday, 25 February 2007, at 8:40 p.m.
• boice crane -- Jim Smith -- Wednesday, 28 February 2007, at 11:17 a.m.
  1 message
• Portable sawmill in Tucker county, WV? -- Chris Moyer -- Thursday, 1 March 2007, at 4:02 p.m.
  1 message
• Looking for Woodwork magazine issues -- Bill Houghton, Sebastopol, CA -- Sunday, 4 March 2007, at 10:57 p.m.
  2 messages -- Newest posted Saturday, 31 March 2007, at 8:44 p.m.
• baldor grinder -- Rick Pixley -- Wednesday, 7 March 2007, at 3:44 p.m.
  1 message
• woodworking lathe -- Michael White -- Wednesday, 7 March 2007, at 10:08 p.m.
  1 message
• Need 1/2" & 3/4" Flexible Conduit -- Matt Prusik -- Thursday, 8 March 2007, at 3:28 a.m.
  4 messages -- Newest posted Tuesday, 13 March 2007, at 3:40 a.m.
• looking for custom text wood burner -- Erik M -- Friday, 9 March 2007, at 1:38 p.m.
  2 messages -- Newest posted Monday, 26 March 2007, at 2:46 p.m.
• Jamaican red cedar wood -- Sandy Nelson -- Monday, 12 March 2007, at 8:48 a.m.
  1 message
• Looking for a Planer -- Gr Smart -- Friday, 16 March 2007, at 2:05 p.m.
  1 message
• Owner's manuals for older Italian machines -- Steve Holman -- Friday, 16 March 2007, at 3:30 p.m.
  1 message
• D Handle Base for P+C 690 motor -- George@Colonel's Workshop-Havertown PA -- Monday, 19 March 2007, at 5:00 p.m.
  1 message
• ryobi sander -- robert davis -- Saturday, 31 March 2007, at 4:12 p.m.
  4 messages -- Newest posted Tuesday, 10 April 2007, at 10:14 a.m.
• Wanted: Baton shaft source -- Don Freriks -- Wednesday, 4 April 2007, at 12:34 p.m.
  2 messages -- Newest posted Wednesday, 4 April 2007, at 5:49 p.m.
• Finishing Cypress -- Kevin P. Lamb -- Thursday, 5 April 2007, at 2:03 p.m.
  2 messages -- Newest posted Friday, 6 April 2007, at 11:37 p.m.
• Carbide segments -- CCollier, Pasadena, Tx -- Tuesday, 10 April 2007, at 8:09 p.m.
  4 messages -- Newest posted Wednesday, 18 April 2007, at 11:09 a.m.
• Auger brace wanted: -- Michael Brady -- Wednesday, 11 April 2007, at 11:11 p.m.
  1 message
• Delta 9" Contractor Saw Parts -- Paul Sadler III -- Sunday, 15 April 2007, at 10:33 a.m.
  6 messages -- Newest posted Friday, 29 June 2007, at 5:55 a.m.
• wtb Baldor 2hp single phase mtr -- Paul Waddle -- Tuesday, 17 April 2007, at 5:20 p.m.
  2 messages -- Newest posted Tuesday, 17 April 2007, at 5:39 p.m.
• Maple -- Greg Lyman -- Wednesday, 18 April 2007, at 12:34 a.m.
  3 messages -- Newest posted Thursday, 19 April 2007, at 9:51 a.m.
• champfond in router -- bubbatay -- Wednesday, 2 May 2007, at 6:07 p.m.
  2 messages -- Newest posted Thursday, 3 May 2007, at 9:38 a.m.
• Furniture Restoration -- Arthur Tinsley -- Thursday, 3 May 2007, at 2:06 p.m.
  1 message
• tenon and mortaise Jig to sell (leigh) -- Christian De Grâce -- Monday, 7 May 2007, at 1:02 p.m.
  1 message
• Shopsmith Mark V FOR SALE IN DOWNINGTOWN, PA *LINK* -- Jackie -- Monday, 14 May 2007, at 6:05 p.m.
  1 message
• woodcraft sharpening system -- harry stagg -- Wednesday, 16 May 2007, at 8:41 a.m.
  1 message
• 20"or24" stationary planer -- peter bunnett -- Wednesday, 16 May 2007, at 10:25 a.m.
  2 messages -- Newest posted Wednesday, 16 May 2007, at 10:27 a.m.
• Porch Swing Plans -- Bob Flood -- Thursday, 17 May 2007, at 10:49 a.m.
  1 message
• tenon cutter -- Peggy -- Saturday, 19 May 2007, at 4:19 p.m.
  1 message
• stanley #3 iron and chipbreaker -- Jack Guzman from Maine -- Sunday, 20 May 2007, at 8:16 p.m.
  2 messages -- Newest posted Tuesday, 29 May 2007, at 6:28 p.m.
• 1/2 LAP JOINT -- DANNY SPANGLER -- Wednesday, 23 May 2007, at 12:54 p.m.
  3 messages -- Newest posted Monday, 18 June 2007, at 7:15 p.m.
• clamps -- Bill Youngblood -- Monday, 28 May 2007, at 3:10 p.m.
  4 messages -- Newest posted Monday, 4 June 2007, at 10:46 p.m.
• Wood Lathe -- George@Colonel's Workshop-Havertown PA -- Monday, 4 June 2007, at 12:53 p.m.
  1 message
• woodworking classes -- mary -- Saturday, 9 June 2007, at 12:42 p.m.
  2 messages -- Newest posted Saturday, 23 June 2007, at 11:25 p.m.
• Drill Press Question -- Paul Nixon -- Sunday, 10 June 2007, at 11:07 a.m.
  2 messages -- Newest posted Wednesday, 13 June 2007, at 3:40 p.m.
• Got Banyan? -- Frits Maas -- Sunday, 10 June 2007, at 4:42 p.m.
  4 messages -- Newest posted Monday, 18 June 2007, at 9:21 a.m.
• WOODWORK magazine -- Larry Mart -- Monday, 11 June 2007, at 3:55 p.m.
  2 messages -- Newest posted Monday, 18 June 2007, at 9:08 p.m.
• Pecan or Hickory in 3" thickness -- Link Van Cleave -- Monday, 18 June 2007, at 2:52 p.m.
  3 messages -- Newest posted Tuesday, 19 June 2007, at 1:33 a.m.
• WTB: Shaper fence -- Dave Winters -- Thursday, 21 June 2007, at 1:38 p.m.
  3 messages -- Newest posted Saturday, 23 June 2007, at 7:51 p.m.
• antique glue joints -- Jerry Lunberg -- Wednesday, 11 July 2007, at 12:02 p.m.
  3 messages -- Newest posted Friday, 13 July 2007, at 8:41 a.m.
• shaper spindle -- Andrew Nistock -- Sunday, 15 July 2007, at 9:47 a.m.
  1 message
• WTB: Fence rails -- Stuart Hough -- Friday, 20 July 2007, at 10:15 p.m.
  3 messages -- Newest posted Tuesday, 4 September 2007, at 8:48 p.m.
• Puff paints -- peter kolb -- Monday, 23 July 2007, at 4:15 p.m.
  2 messages -- Newest posted Tuesday, 24 July 2007, at 7:17 a.m.
• radial arm saw manual -- les winter -- Friday, 27 July 2007, at 7:14 a.m.
  1 message
• Inca Manual -- Jim Meyer -- Friday, 27 July 2007, at 4:00 p.m.
  4 messages -- Newest posted Friday, 3 August 2007, at 6:10 p.m.
• Craftsman Table Saw Dado insert -- Dick Krieger -- Friday, 27 July 2007, at 9:38 p.m.
  5 messages -- Newest posted Thursday, 20 September 2007, at 8:12 a.m.
• vicmarc chuck -- harv in dewey -- Friday, 27 July 2007, at 10:03 p.m.
  1 message
• built-in bookcase reference book(s) -- redstone, robert -- Saturday, 4 August 2007, at 7:48 p.m.
  1 message
• Cider Press Plans -- Shawn J -- Monday, 6 August 2007, at 10:02 p.m.
  3 messages -- Newest posted Saturday, 11 August 2007, at 12:49 p.m.
• J-Line Wood lathe (Chucks) -- John Taylor -- Thursday, 9 August 2007, at 9:24 a.m.
  3 messages -- Newest posted Friday, 10 August 2007, at 9:35 a.m.
• TS Overarm blade/dust guard -- Sean Troy -- Friday, 10 August 2007, at 7:55 p.m.
  2 messages -- Newest posted Tuesday, 21 August 2007, at 10:06 a.m.
• clock hinges *PIC* -- John Carlson -- Monday, 20 August 2007, at 9:37 p.m.
  2 messages -- Newest posted Sunday, 26 August 2007, at 6:55 p.m.
• Wood for Flooring and Moulding -- dwr -- Wednesday, 22 August 2007, at 8:18 p.m.
  1 message
• 1 1/4 to 1" chuck adapter -- Mike Nelson -- Tuesday, 28 August 2007, at 6:11 p.m.
  4 messages -- Newest posted Tuesday, 2 October 2007, at 10:44 a.m.
• I am looking for a foot powered grinding wheel -- Jody Rosedahl -- Monday, 3 September 2007, at 12:02 p.m.
  2 messages -- Newest posted Friday, 21 September 2007, at 11:52 a.m.
• Circular seat plans -- Robert Martin -- Wednesday, 12 September 2007, at 11:52 a.m.
  1 message
• Walker Turner 16" Bandsaw wanted -- Nelson -- Friday, 14 September 2007, at 4:55 p.m.
  1 message
• Need powermatic/Nova II spindle adapter -- Mike Nelson -- Sunday, 16 September 2007, at 1:59 p.m.
  1 message
• Need powermatic/Nova II spindle adapter insert *NM* -- Mike Nelson -- Sunday, 16 September 2007, at 2:25 p.m.
  1 message
• counter sinks that work -- Anthony Messina -- Wednesday, 19 September 2007, at 9:36 a.m.
  1 message
• wood lathe face plate -- Paul Waddle -- Friday, 21 September 2007, at 1:52 p.m.
  4 messages -- Newest posted Monday, 8 October 2007, at 10:03 p.m.
• lap desk/table top desk plans -- les winter -- Monday, 24 September 2007, at 7:22 a.m.
  3 messages -- Newest posted Sunday, 6 January 2008, at 3:25 p.m.
• Magazines in Benefits Auction *LINK* -- Bill Houghton, Sebastopol, CA -- Monday, 1 October 2007, at 5:35 p.m.
  1 message
• RBI/Woodmaster Rip Blades -- Ken Moonitz -- Monday, 1 October 2007, at 7:15 p.m.
  2 messages -- Newest posted Wednesday, 3 October 2007, at 11:56 a.m.
• hardware!! - brass fittings, nuts, locking collars -- Yup Done! -- Sunday, 7 October 2007, at 8:21 p.m.
  2 messages -- Newest posted Monday, 8 October 2007, at 12:25 a.m.
• Need junk #5 . . . -- steve mackay -- Saturday, 20 October 2007, at 8:48 p.m.
  1 message
• hand planes -- roy -- Thursday, 25 October 2007, at 12:44 p.m.
  2 messages -- Newest posted Thursday, 25 October 2007, at 10:12 p.m.
• Paper, Books, Advertising, Stuff *LINK* -- Gary Roberts -- Friday, 26 October 2007, at 2:09 a.m.
  1 message
• Craftsman Swivel Castors for Tool Stands -- Don Fraser -- Friday, 26 October 2007, at 3:14 p.m.
  3 messages -- Newest posted Monday, 29 October 2007, at 2:57 p.m.
• Dewalt 925 RAS parts -- Brian MacDonald - Olympia, Wa -- Saturday, 27 October 2007, at 5:16 p.m.
  3 messages -- Newest posted Wednesday, 31 October 2007, at 4:58 p.m.
• DeWalt Part -- Larry in NW Ohio -- Sunday, 28 October 2007, at 11:08 a.m.
  1 message
• Need Machine Work -- (Termite) D. Campbell -- Sunday, 28 October 2007, at 9:58 p.m.
  11 messages -- Newest posted Thursday, 3 January 2008, at 4:45 p.m.
• table saw owners manual -- Jim Hoeller -- Wednesday, 31 October 2007, at 6:53 p.m.
  7 messages -- Newest posted Saturday, 26 January 2008, at 9:31 p.m.
• Michael's Cherry Stain -- Roy Fleming -- Friday, 2 November 2007, at 8:30 a.m.
  4 messages -- Newest posted Sunday, 13 January 2008, at 8:57 p.m.
• Step jaws for talon chuck -- paul waddle -- Tuesday, 6 November 2007, at 7:16 a.m.
  1 message
• quartersawn cedar -- George LaLonde -- Thursday, 8 November 2007, at 9:14 a.m.
  2 messages -- Newest posted Saturday, 17 November 2007, at 8:32 p.m.
• WTB - Scorp of Inshave -- Tim Caley - North Litttle Rock -- Thursday, 8 November 2007, at 7:02 p.m.
  1 message
• LAngdon Miter Box Stop bolt -- Mark Kuzee -- Saturday, 10 November 2007, at 4:36 p.m.
  2 messages -- Newest posted Sunday, 25 November 2007, at 11:11 p.m.
• Nova Titan Jaw Set -- Mike Jones -- Sunday, 11 November 2007, at 1:30 a.m.
  1 message
• Electric Motor -- Jack Wortz -- Saturday, 17 November 2007, at 8:28 a.m.
  2 messages -- Newest posted Sunday, 25 November 2007, at 10:00 p.m.
• 5/0 or 6/0 steel wool? -- Nick -- Saturday, 17 November 2007, at 5:23 p.m.
  1 message
• Bonnie Klein threading jig -- Clyde Collier -- Wednesday, 21 November 2007, at 6:21 p.m.
  1 message
• 92 1/2 " Band Saw Blades -- Steve in Jobstown, NJ -- Wednesday, 21 November 2007, at 7:06 p.m.
  3 messages -- Newest posted Friday, 23 November 2007, at 12:37 p.m.
• Bird house ornaments -- peter panzarella -- Thursday, 22 November 2007, at 1:22 p.m.
  2 messages -- Newest posted Thursday, 22 November 2007, at 8:04 p.m.
• mamual or parts list -- Larry McNear -- Saturday, 24 November 2007, at 3:16 p.m.
  1 message
• Incra TSII Rails -- Bob in NE Ohio -- Wednesday, 28 November 2007, at 11:05 a.m.
  1 message
• Delta lathe parts -- Mac -- Saturday, 1 December 2007, at 5:43 p.m.
  3 messages -- Newest posted Sunday, 2 December 2007, at 9:26 a.m.
• 18 inch tires -- Larry Hauss -- Saturday, 8 December 2007, at 5:25 a.m.
  3 messages -- Newest posted Saturday, 8 December 2007, at 4:03 p.m.
• rockwell riser block -- ryker acuna -- Saturday, 8 December 2007, at 6:21 p.m.
  3 messages -- Newest posted Tuesday, 11 December 2007, at 9:44 a.m.
• crescent jointer parts -- David -- Sunday, 9 December 2007, at 6:22 p.m.
  3 messages -- Newest posted Tuesday, 18 December 2007, at 11:27 a.m.
• 3x3x36" cherry for legs -- Wayne Carson "TX" -- Wednesday, 12 December 2007, at 3:21 p.m.
  2 messages -- Newest posted Saturday, 22 December 2007, at 10:14 a.m.
• autocad -- McKay Sleight -- Thursday, 13 December 2007, at 2:22 p.m.
  1 message
• Table Saw Advice -- Helen -- Thursday, 13 December 2007, at 3:19 p.m.
  2 messages -- Newest posted Friday, 14 December 2007, at 10:08 a.m.
• Clearwater Color- Antique Cherry Stain -- Meghan -- Saturday, 15 December 2007, at 10:50 a.m.
  1 message
• WTB: Delta Shaper Stub Spindle 43-345 w/cutters -- James Galvin -- Saturday, 15 December 2007, at 7:02 p.m.
  1 message
• Stanley 12-071 Router Plane -- woodie1 -- Saturday, 15 December 2007, at 7:15 p.m.
  2 messages -- Newest posted Sunday, 23 December 2007, at 7:18 p.m.
• Bowl coring tools wanted -- Nike Hunter -- Sunday, 23 December 2007, at 7:54 a.m.
  1 message
• toy truck/ construction equip. plans -- Paul Keller -- Thursday, 27 December 2007, at 9:44 a.m.
  4 messages -- Newest posted Thursday, 14 February 2008, at 4:32 a.m.
• WTB Stanley no.4-1/2 type 9 -- Mike D. -- Thursday, 27 December 2007, at 6:30 p.m.
  2 messages -- Newest posted Friday, 28 December 2007, at 10:01 a.m.
• Antique copper punched tins -- Karen -- Sunday, 30 December 2007, at 1:07 a.m.
  3 messages -- Newest posted Sunday, 6 January 2008, at 11:31 a.m.
• wood lathe -- plowboy -- Sunday, 30 December 2007, at 12:32 p.m.
  1 message
• wanted to buy -- kent borcherding -- Monday, 31 December 2007, at 2:34 p.m.
  1 message
• WTB Lion trimmer picture frame attachment -- Paul Waddle -- Tuesday, 1 January 2008, at 11:24 p.m.
  1 message
• Wood Working Machines -- Jerry in Calgary -- Thursday, 3 January 2008, at 9:35 a.m.
  2 messages -- Newest posted Sunday, 6 January 2008, at 11:27 a.m.
• Powermatic 073 dust collector bags -- Jon Grider -- Thursday, 10 January 2008, at 6:52 p.m.
  5 messages -- Newest posted Thursday, 24 January 2008, at 5:50 p.m.
• redwood -- papa211 -- Friday, 11 January 2008, at 4:01 p.m.
  2 messages -- Newest posted Friday, 11 January 2008, at 4:47 p.m.
• Great Supplier for Dynabrade products -- William Long -- Wednesday, 16 January 2008, at 10:53 a.m.
  1 message
• delta 1160 -- Jack Wortz -- Thursday, 17 January 2008, at 8:52 p.m.
  1 message
• lathe chisels -- plowboy -- Saturday, 19 January 2008, at 5:12 p.m.
  3 messages -- Newest posted Sunday, 20 January 2008, at 6:52 p.m.
• small cut-offs you are throwing away! *PIC* -- Mark Williamson -- Wednesday, 23 January 2008, at 11:05 a.m.
  6 messages -- Newest posted Tuesday, 25 March 2008, at 11:46 p.m.
• Jet 14" bandsaw fence -- Eric Knutsen -- Sunday, 27 January 2008, at 7:18 p.m.
  2 messages -- Newest posted Wednesday, 5 March 2008, at 1:32 p.m.
• solid wood tables -- Pam Gerren -- Monday, 28 January 2008, at 10:53 a.m.
  1 message
• whatever clock -- Freeman Rose -- Tuesday, 29 January 2008, at 2:13 p.m.
  1 message
• Carving screw? -- coontracker -- Wednesday, 30 January 2008, at 11:20 a.m.
  3 messages -- Newest posted Friday, 7 March 2008, at 9:49 a.m.
• Vanishing door on furniture? *PIC* -- Ruth Mark -- Wednesday, 30 January 2008, at 12:41 p.m.
  1 message
• WTB: Quartersawn Beech for Planemaking -- Jim Galvin -- Thursday, 31 January 2008, at 9:36 p.m.
  1 message
• Camphor tray -- F. Varquez -- Saturday, 2 February 2008, at 4:05 p.m.
  1 message
• Reliant Planer Part -- Wayne Matheny -- Tuesday, 5 February 2008, at 5:05 p.m.
  2 messages -- Newest posted Tuesday, 5 February 2008, at 5:16 p.m.
• dunlap wood lathe -- Earnest Sewell -- Saturday, 9 February 2008, at 2:23 p.m.
  2 messages -- Newest posted Sunday, 10 February 2008, at 10:17 a.m.
• glider rocker plans -- Beaconhawks -- Tuesday, 12 February 2008, at 8:22 a.m.
  2 messages -- Newest posted Sunday, 2 March 2008, at 10:52 a.m.
• COMPUCARVE/CARVEWRIGHT -- TERRANCE CLOSSON -- Tuesday, 12 February 2008, at 8:43 p.m.
  2 messages -- Newest posted Tuesday, 25 March 2008, at 2:42 a.m.
• WTB Delta lathe part -- Paul Waddle -- Wednesday, 13 February 2008, at 10:07 a.m.
  1 message
• WTB Parts for a Dewalt GP RAS -- Mike Fitterling -- Friday, 15 February 2008, at 5:54 p.m.
  4 messages -- Newest posted Tuesday, 18 March 2008, at 11:12 p.m.
• Vice mounted Spokeshave horse/mule/pony -- Darylee -- Tuesday, 19 February 2008, at 9:44 a.m.
  8 messages -- Newest posted Wednesday, 26 March 2008, at 1:41 p.m.
• Secretary Plans -- Paul Sadler -- Friday, 22 February 2008, at 10:37 p.m.
  2 messages -- Newest posted Sunday, 2 March 2008, at 10:55 a.m.
• Axminster Eccentric chuck -- HeatherA in Alaska -- Monday, 25 February 2008, at 8:54 p.m.
  1 message
• Spray on Velvet Finish for cabinet -- Douglas Galvez -- Tuesday, 26 February 2008, at 1:02 a.m.
  2 messages -- Newest posted Tuesday, 26 February 2008, at 7:46 p.m.
• Wooten desk -- Coldjl -- Tuesday, 4 March 2008, at 8:36 a.m.
  2 messages -- Newest posted Saturday, 8 March 2008, at 11:08 a.m.
• Rockwell Uniplane -- Bob Ballard -- Friday, 7 March 2008, at 12:55 p.m.
  1 message
• Cantilever Pallet Racks 22' x 10' -- Ron Nelson -- Friday, 7 March 2008, at 4:32 p.m.
  1 message
• Cyclone Dust Collector System -- Ron Nelson -- Friday, 7 March 2008, at 4:34 p.m.
  1 message
• candle sockets -- michael glicker -- Sunday, 9 March 2008, at 7:20 p.m.
  2 messages -- Newest posted Monday, 10 March 2008, at 1:02 p.m.
• I need a table saw moter -- dtenney -- Monday, 10 March 2008, at 8:43 a.m.
  1 message
• Woodturning Magazine -- Larry Simonson -- Saturday, 15 March 2008, at 1:18 a.m.
  1 message
• stanley #45 plane cutters -- frank yazzetta -- Saturday, 15 March 2008, at 5:32 p.m.
  3 messages -- Newest posted Monday, 17 March 2008, at 8:12 a.m.
• Does anyone have duplicate PBS DVDs on woodshows? -- North of the Border -- Sunday, 23 March 2008, at 2:25 p.m.
  1 message
• wanted multi router -- Joseph Capasso -- Monday, 24 March 2008, at 8:47 p.m.
  2 messages -- Newest posted Wednesday, 26 March 2008, at 12:29 p.m.
• brass key hooks -- James Clair -- Saturday, 29 March 2008, at 7:38 a.m.
  2 messages -- Newest posted Saturday, 29 March 2008, at 9:11 a.m.
• WANTED: Ray Larson ("Genuine Forgery") Pommel Knif -- Matthew Dworman -- Saturday, 29 March 2008, at 12:25 p.m.
  1 message
• WANTED: Ray Larson "Genuine Forgery" Pommel Knife -- Matthew Dworman -- Saturday, 29 March 2008, at 12:26 p.m.
  1 message
• Bottle Stoppers -- elliott -- Tuesday, 1 April 2008, at 8:56 a.m.
  1 message
• Mill-route reducer attachement -- Paul Waddle -- Tuesday, 1 April 2008, at 3:57 p.m.
  1 message
• Need lathe handwheel -- DizD -- Tuesday, 1 April 2008, at 10:18 p.m.
  1 message
• 20" Bandsaw Fence -- Bob Ballard -- Sunday, 6 April 2008, at 7:59 p.m.
  1 message
• Used roughing gouge -- Wayne Carson "TX" -- Monday, 7 April 2008, at 10:15 a.m.
  2 messages -- Newest posted Thursday, 24 April 2008, at 9:16 a.m.
• Vicmarc Chuck Faceplate Rings *PIC* -- David Propst -- Tuesday, 8 April 2008, at 10:23 a.m.
  1 message
• WTB Tool Cabinet/Chest -- bowlman -- Wednesday, 9 April 2008, at 6:40 p.m.
  1 message
• Wanted Rob Cosman videos -- Wayne Carson -- Wednesday, 9 April 2008, at 11:23 p.m.
  1 message
• Rockwell\Delta Elevation Gear -- Jim Butchart -- Thursday, 10 April 2008, at 4:32 p.m.
  2 messages -- Newest posted Sunday, 13 April 2008, at 10:13 a.m.
• Curly or Quilted 10/4 Maple (12" wide by 48" long) -- Stephen Roth -- Thursday, 10 April 2008, at 4:50 p.m.
  4 messages -- Newest posted Wednesday, 14 May 2008, at 8:26 a.m.
• Looking for wine rack plans -- Matthew -- Monday, 14 April 2008, at 8:11 p.m.
  2 messages -- Newest posted Tuesday, 15 April 2008, at 10:36 a.m.
• help *PIC* -- Spencer Boyd -- Wednesday, 30 April 2008, at 10:42 p.m.
  2 messages -- Newest posted Saturday, 24 May 2008, at 10:28 p.m.
• child bed -- James Russell -- Friday, 2 May 2008, at 12:14 p.m.
  1 message
• WTB: Oneway 2436 60" Bed Extension -- Peter Teubel -- Tuesday, 6 May 2008, at 11:49 p.m.
  2 messages -- Newest posted Tuesday, 10 June 2008, at 9:08 a.m.
• Rug Hooking Hook -- cl -- Friday, 9 May 2008, at 12:08 p.m.
  4 messages -- Newest posted Monday, 23 March 2009, at 11:33 a.m.
• Feneuil ? Wood Cabinet Knobs -- michele -- Friday, 9 May 2008, at 1:49 p.m.
  1 message
• Damaged carving machines -- Paul Waddle -- Sunday, 18 May 2008, at 9:44 a.m.
  3 messages -- Newest posted Thursday, 26 June 2008, at 11:05 p.m.
• tomlee lathe -- bernie feinerman -- Thursday, 22 May 2008, at 6:43 p.m.
  2 messages -- Newest posted Saturday, 24 May 2008, at 10:26 p.m.
• music stand -- Tom Austin -- Sunday, 25 May 2008, at 10:15 p.m.
  2 messages -- Newest posted Saturday, 7 June 2008, at 9:38 a.m.
• WTB Stanley Two-Tone OH5 -- Tom MacGregor -- Saturday, 14 June 2008, at 9:20 p.m.
  2 messages -- Newest posted Thursday, 19 June 2008, at 10:16 a.m.
• DD90 owners manual -- Maurice A Laferriere -- Monday, 16 June 2008, at 11:21 a.m.
  1 message
• magnolia -- Dan Dolk -- Thursday, 19 June 2008, at 11:38 a.m.
  1 message
• used wood lathe -- marty sharp -- Saturday, 21 June 2008, at 1:04 p.m.
  1 message
• Emil Milan -- Norm Sartorius -- Wednesday, 25 June 2008, at 11:39 p.m.
  1 message
• wood lathe compound -- Paul Waddle -- Sunday, 29 June 2008, at 11:34 a.m.
  1 message
• threaded wood dowels and wooden nuts -- Larry Gies -- Sunday, 20 July 2008, at 9:41 p.m.
  2 messages -- Newest posted Tuesday, 29 July 2008, at 5:34 p.m.
• Walking sticks - canes -- Larry Tilley -- Thursday, 24 July 2008, at 9:34 a.m.
  1 message
• Carter Band Saw Guides for 14-in Jet -- Larry Gelder -- Thursday, 24 July 2008, at 6:15 p.m.
  1 message
• copy lathe -- art lackey -- Monday, 4 August 2008, at 7:56 p.m.
  1 message
• 5/4 QSWO -- Kevin Mac Luskie -- Tuesday, 5 August 2008, at 1:46 p.m.
  3 messages -- Newest posted Monday, 18 August 2008, at 3:53 p.m.
• need Ryobi Ap12 for parts -- vernon huffines -- Sunday, 31 August 2008, at 8:08 a.m.
  1 message
• Scholarships for Marquetry training -- Rey -- Friday, 5 September 2008, at 12:50 a.m.
  1 message
• woodcarver CNC -- J Janssen -- Friday, 5 September 2008, at 6:09 p.m.
  1 message
• emmert's vise model t2 turtle back -- hugh -- Tuesday, 9 September 2008, at 2:41 p.m.
  1 message
• Kutzall Store *LINK* -- carver9919 -- Wednesday, 17 September 2008, at 4:33 p.m.
  1 message
• One Way--the only way.... -- Richard Overby -- Friday, 19 September 2008, at 10:10 a.m.
  1 message
• Atlanta antique tool shopping -- Paul J -- Friday, 19 September 2008, at 6:36 p.m.
  2 messages -- Newest posted Sunday, 21 September 2008, at 2:16 p.m.
• Berbice or Planter's Chair -- Cecil Nickerson -- Sunday, 21 September 2008, at 8:16 p.m.
  1 message
• adjustable candle stand plan -- Dave LaPine -- Monday, 22 September 2008, at 9:50 a.m.
  1 message
• FOLEY 387 Owner's Manual -- Matt Prusik -- Wednesday, 24 September 2008, at 3:22 a.m.
  1 message
• WANTED: BCTW PD-11 Proportional Divider or Similar -- David W. Dougherty -- Friday, 26 September 2008, at 12:41 p.m.
  3 messages -- Newest posted Wednesday, 1 October 2008, at 12:01 p.m.
• RELIANT MANUAL -- Billie Webster -- Saturday, 4 October 2008, at 10:36 a.m.
  2 messages -- Newest posted Sunday, 5 October 2008, at 3:44 p.m.
• copy lathe -- art lackey -- Monday, 6 October 2008, at 10:17 p.m.
  1 message
• cupboard/drop down table -- Glenn Jordan -- Monday, 13 October 2008, at 10:50 p.m.
  1 message
• angle cut -- GarryF -- Tuesday, 14 October 2008, at 7:02 a.m.
  4 messages -- Newest posted Tuesday, 14 October 2008, at 10:57 p.m.
• chair rail molding -- Jack -- Monday, 20 October 2008, at 11:27 a.m.
  1 message
• Cherry crotch turning block -- Paul Waddle -- Monday, 27 October 2008, at 8:24 a.m.
  1 message
• Oliver Jig Saw -- Joel Warren -- Tuesday, 28 October 2008, at 7:41 a.m.
  1 message
• stanley#45 plane parts hollows and rounds -- frank yazzetta -- Tuesday, 4 November 2008, at 2:39 p.m.
  1 message
• Oliver wood lathe -- Greg30 -- Thursday, 13 November 2008, at 1:23 a.m.
  1 message
• OneWood slicing tool -- John Cascarano -- Sunday, 23 November 2008, at 11:06 a.m.
  5 messages -- Newest posted Monday, 24 November 2008, at 1:54 a.m.
• want to buy lathe -- plowboy -- Tuesday, 25 November 2008, at 11:35 a.m.
  1 message
• WTB an opti viewer 2 1/2 power -- paul waddle -- Wednesday, 26 November 2008, at 8:58 a.m.
  1 message
• Ridgid sander -- Larry in NW Ohio -- Wednesday, 26 November 2008, at 4:06 p.m.
  1 message
• Birch/Oak Plywood Source -- Tom C -- Friday, 28 November 2008, at 3:44 p.m.
  6 messages -- Newest posted Friday, 5 December 2008, at 12:31 p.m.
• Starrett square & other tools on Benefits Auction *NM* *LINK* -- Bill Houghton, overcast in Sebastopol, CA -- Friday, 5 December 2008, at 5:11 p.m.
  1 message
• Cordless drill and driver on Benefits Auction *LINK* -- Bill Houghton, getting sunny in Sebastopol, CA -- Monday, 8 December 2008, at 7:22 p.m.
  1 message
• Bonnie Klein threading jig -- Kelly Marr -- Tuesday, 16 December 2008, at 8:54 a.m.
  1 message
• Ryobi 8 1/2 SCMS Model TSS 220 -- George@Colonel's Workshop-Havertown PA -- Tuesday, 16 December 2008, at 11:37 a.m.
  1 message
• Wood Book -- Susanna McCarthy -- Wednesday, 17 December 2008, at 2:36 p.m.
  3 messages -- Newest posted Wednesday, 17 December 2008, at 11:55 p.m.
• WTB Kreg right angle clamp -- Bill White -- Friday, 19 December 2008, at 12:23 p.m.
  1 message
• Wood Blanks -- plowboy -- Sunday, 21 December 2008, at 6:13 a.m.
  3 messages -- Newest posted Monday, 5 January 2009, at 5:23 p.m.
• powermatic 66 -- ernie -- Saturday, 27 December 2008, at 6:38 p.m.
  1 message
• Dewalt Woodworker's Saw fence -- Ben Retzinger -- Sunday, 28 December 2008, at 9:02 p.m.
  1 message
• Curly Red Oak -- Johanna -- Sunday, 28 December 2008, at 9:14 p.m.
  1 message
• Delta lath bed extension -- Bill McWhirter -- Tuesday, 30 December 2008, at 12:06 p.m.
  2 messages -- Newest posted Thursday, 1 January 2009, at 5:18 p.m.
• Letter size drill bit box -- Bill Houghton, California cold in Sebastopol, CA -- Wednesday, 31 December 2008, at 11:59 a.m.
  2 messages -- Newest posted Wednesday, 7 January 2009, at 8:23 a.m.
• CNC / shopbot labor -- Kris -- Thursday, 1 January 2009, at 7:23 p.m.
  5 messages -- Newest posted Monday, 12 January 2009, at 12:59 a.m.
• Shop made mobile base for jointer -- Jim in Snohomish, WA -- Monday, 5 January 2009, at 3:26 p.m.
  3 messages -- Newest posted Thursday, 26 February 2009, at 3:11 p.m.
• dulicarver mesurements -- Paul Waddle -- Sunday, 11 January 2009, at 8:06 p.m.
  4 messages -- Newest posted Tuesday, 10 February 2009, at 11:04 a.m.
• Greenwood Resources -- PaulJason -- Friday, 16 January 2009, at 5:35 p.m.
  6 messages -- Newest posted Sunday, 15 February 2009, at 10:24 a.m.
• AMT Model 4110 band saw -- Len Staskiel -- Thursday, 12 February 2009, at 9:54 a.m.
  2 messages -- Newest posted Friday, 13 February 2009, at 9:48 p.m.
• Carlyle Lynch plan -- DizD -- Monday, 16 February 2009, at 10:33 p.m.
  1 message
• Rocking Chair Plans -- Pierre Plamondon -- Saturday, 21 February 2009, at 2:18 p.m.
  3 messages -- Newest posted Sunday, 22 February 2009, at 12:46 p.m.
• drum sander -- Kirk -- Tuesday, 24 February 2009, at 1:13 a.m.
  1 message
• pm 3520 tool rest -- daniel gou. -- Tuesday, 24 February 2009, at 6:16 p.m.
  3 messages -- Newest posted Saturday, 28 February 2009, at 9:35 a.m.
• Info on Ryobi resaw -- Alan Weber -- Sunday, 1 March 2009, at 8:47 p.m.
  2 messages -- Newest posted Monday, 2 March 2009, at 1:18 a.m.
• need Ethan Allen thumb screws *PIC* -- Derrick -- Monday, 2 March 2009, at 11:16 a.m.
  6 messages -- Newest posted Sunday, 15 March 2009, at 4:32 p.m.
• Moak Super 36" bandsaw -- Tom Cline -- Monday, 9 March 2009, at 6:22 a.m.
  4 messages -- Newest posted Wednesday, 1 April 2009, at 9:33 p.m.
• Wanted Turned Bowls -- Charlie Zeller -- Sunday, 15 March 2009, at 5:55 p.m.
  1 message
• Spruce -- Edward Kim Courter -- Tuesday, 24 March 2009, at 8:38 p.m.
  1 message
• Wanted- Jet Mini lathe -- Hought Wahl -- Friday, 27 March 2009, at 8:53 a.m.
  1 message
• WTB: Keyhole Embossed #6 Levercap -- Tom MacGregor -- Sunday, 29 March 2009, at 7:01 p.m.
  2 messages -- Newest posted Thursday, 2 April 2009, at 7:35 a.m.
• Jet planer bearings -- Marcus -- Friday, 10 April 2009, at 8:17 p.m.
  3 messages -- Newest posted Saturday, 11 April 2009, at 3:08 p.m.
• Dewalt radial arm saw model 925 -- Jon -- Monday, 13 April 2009, at 9:17 a.m.
  3 messages -- Newest posted Friday, 5 June 2009, at 6:00 p.m.
• Norfolk Island Pine turning blanks -- Dominic Ferrara -- Tuesday, 5 May 2009, at 1:27 a.m.
  1 message
• Vise Carraige -- Mike Poursine -- Tuesday, 19 May 2009, at 8:21 p.m.
  3 messages -- Newest posted Tuesday, 26 May 2009, at 7:06 p.m.
• Looking for Burning Unit -- Ruth Niles -- Wednesday, 20 May 2009, at 11:14 a.m.
  1 message
• milk paint -- Tom Russell -- Monday, 1 June 2009, at 6:29 p.m.
  2 messages -- Newest posted Tuesday, 2 June 2009, at 1:06 a.m.
• lid support elbow hinges -- trip -- Friday, 5 June 2009, at 4:10 p.m.
  1 message
• Lacquer based stain -- Mickey Flora -- Monday, 15 June 2009, at 8:59 p.m.
  2 messages -- Newest posted Tuesday, 16 June 2009, at 2:05 p.m.
• WTB 12/4 walnut -- John_in_Az -- Saturday, 27 June 2009, at 3:32 p.m.
  2 messages -- Newest posted Saturday, 27 June 2009, at 11:05 p.m.
• Finishing Green -- Howard Russell -- Saturday, 4 July 2009, at 12:44 p.m.
  5 messages -- Newest posted Sunday, 26 July 2009, at 10:52 p.m.
• parts for Binks model 15 spray gun -- peter kolb -- Monday, 13 July 2009, at 6:34 p.m.
  2 messages -- Newest posted Monday, 27 July 2009, at 4:28 p.m.
• 140 plane blade -- arw01 -- Tuesday, 14 July 2009, at 12:02 a.m.
  3 messages -- Newest posted Saturday, 18 July 2009, at 6:57 p.m.
• Save electric in shop/ Vaccume clamp -- luvzwood -- Thursday, 16 July 2009, at 6:13 p.m.
  2 messages -- Newest posted Friday, 17 July 2009, at 10:59 p.m.
• Jet 10x2x1" Flap wheel -- Edward L. Clark -- Tuesday, 21 July 2009, at 8:47 p.m.
  1 message
• Burls in Northern Minnesota -- Rich Eberly -- Sunday, 26 July 2009, at 12:04 a.m.
  1 message
• Wood Software -- Toby Salerno -- Wednesday, 19 August 2009, at 12:21 p.m.
  2 messages -- Newest posted Friday, 4 September 2009, at 1:56 p.m.
• Mineral Spirts vs. Kerosene -- Sawman -- Friday, 21 August 2009, at 4:45 p.m.
  1 message
• dremel lathe -- bob davis -- Friday, 21 August 2009, at 6:10 p.m.
  1 message
• walker turner bench drill press -- mike neitzel -- Wednesday, 16 September 2009, at 4:49 p.m.
  3 messages -- Newest posted Sunday, 20 September 2009, at 9:35 a.m.
• morso chopper -- page -- Saturday, 26 September 2009, at 1:15 a.m.
  1 message
• Wobble washers wanted. *LINK* -- Rick L -- Thursday, 1 October 2009, at 10:10 a.m.
  2 messages -- Newest posted Thursday, 1 October 2009, at 10:51 p.m.
• bed extention for Nova Mercury -- NIck Hughes -- Saturday, 3 October 2009, at 3:56 p.m.
  3 messages -- Newest posted Sunday, 4 October 2009, at 12:36 a.m.
• Old Iron Stuff -- Frank Mutchler -- Thursday, 8 October 2009, at 3:38 p.m.
  4 messages -- Newest posted Friday, 23 October 2009, at 3:02 p.m.
• Need Gear belt -- Garry Bledsoe -- Tuesday, 13 October 2009, at 5:02 p.m.
  2 messages -- Newest posted Monday, 19 October 2009, at 11:15 a.m.
• 6 1/2" jointer or wider -- Jay, Morris County, NJ -- Monday, 19 October 2009, at 10:07 a.m.
  1 message
• I have some very old wood to sell -- DEE -- Tuesday, 20 October 2009, at 10:17 a.m.
  1 message
• Eddie Hamrick -- stephen Bowles -- Thursday, 22 October 2009, at 1:42 p.m.
  2 messages -- Newest posted Friday, 23 October 2009, at 11:19 a.m.
• Crafstman Wood Service -- John H Tucker -- Monday, 26 October 2009, at 10:44 a.m.
  1 message
• Rotary Planer -- Frank in Colorado Springs -- Sunday, 8 November 2009, at 11:54 p.m.
  2 messages -- Newest posted Tuesday, 10 November 2009, at 9:06 a.m.
• upper saw guide holder -- gary latture -- Monday, 9 November 2009, at 4:57 p.m.
  1 message
• powermatic jet lock fence -- tony -- Sunday, 15 November 2009, at 7:59 a.m.
  2 messages -- Newest posted Monday, 16 November 2009, at 8:19 p.m.

Post New Message      Search Current Messages      Set Preferences      Top 10      View User Profiles      Create Profile       Messageboard FAQs      SPAM PATROL

Looking for Something? is maintained by Ellis Walentine with WebBBS 5.12.